The mounting is actually done by "ceph-disk", which can also run from a
udev rule. It gets options from the ceph configuration option "osd
mount options {fstype}", which you can set globally or per-daemon as
with any other ceph option.
On 08/25/2014 04:11 PM, Somnath Roy wrote:
> Hi,
>
> Ceph-deploy does partition and mount the OSD/journal drive for the user.
> I can’t find any option of supplying mount options like discard,noatiome
> etc suitable for SSDs during ceph-deploy.
>
> Is there a way to control it ? If not, what could be the workaround ?
>
>
>
> Thanks & Regards
>
> Somnath
>
>
> ------------------------------------------------------------------------
>
> PLEASE NOTE: The information contained in this electronic mail message
> is intended only for the use of the designated recipient(s) named above.
> If the reader of this message is not the intended recipient, you are
> hereby notified that you have received this message in error and that
> any review, dissemination, distribution, or copying of this message is
> strictly prohibited. If you have received this communication in error,
> please notify the sender by telephone or e-mail (as shown above)
> immediately and destroy any and all copies of this message in your
> possession (whether hard copies or electronically stored copies).
>
>
>
> _______________________________________________
> ceph-users mailing list
> [email protected]
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
--
Dan Mick, Filesystem Engineering
Inktank Storage, Inc. http://inktank.com
Ceph docs: http://ceph.com/docs
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
