Hi, I've setup a cluster with 3 monitors and 2 OSD nodes with 2 disks each.Cluster is in active+clean state. But, "ceph -s" keeps throwing the following message, every other time "ceph -s" is run.
#ceph -s 2014-09-19 04:13:07.116662 7fc88c3f9700 0 -- :/1011833 >> *192.168.240.200 <http://192.168.240.200>:*6789/0 pipe(0x7fc890021200 sd=3 :0 s=1 pgs=0 cs=0 l=1 c=0x7fc890021470).fault If ceph -s is run from the same IP that is listed above, ceph -s doesn't throw the message, not even once. Appreciate your suggestions. Thanks
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
