Also, using the init.d framework seams to fail. piers@sol:/etc/ceph$ sudo service ceph start osd.1 /etc/init.d/ceph: osd.1 not found (/etc/ceph/ceph.conf defines , /var/lib/ceph defines )
The disks are mounted piers@sol:~$ cat /etc/mtab | sort cgroup /sys/fs/cgroup/cpuset cgroup rw,relatime,cpuset 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 /dev/sdc1 /var/lib/ceph/osd/ceph-16 xfs rw,noatime 0 0 /dev/sdd1 /var/lib/ceph/osd/ceph-17 xfs rw,noatime 0 0 /dev/sde1 /var/lib/ceph/osd/ceph-0 xfs rw,noatime 0 0 /dev/sdf1 /var/lib/ceph/osd/ceph-1 xfs rw,noatime 0 0 /dev/sdg1 /var/lib/ceph/osd/ceph-2 xfs rw,noatime 0 0 /dev/sdh1 /var/lib/ceph/osd/ceph-3 xfs rw,noatime 0 0 /dev/sdi1 /var/lib/ceph/osd/ceph-4 xfs rw,noatime 0 0 /dev/sdj1 /var/lib/ceph/osd/ceph-5 xfs rw,noatime 0 0 /dev/sdk1 /var/lib/ceph/osd/ceph-6 xfs rw,noatime 0 0 /dev/sdl1 /var/lib/ceph/osd/ceph-7 xfs rw,noatime 0 0 /dev/sdm1 /var/lib/ceph/osd/ceph-8 xfs rw,noatime 0 0 /dev/sdn1 /var/lib/ceph/osd/ceph-9 xfs rw,noatime 0 0 /dev/sdo1 /var/lib/ceph/osd/ceph-10 xfs rw,noatime 0 0 /dev/sdp1 /var/lib/ceph/osd/ceph-11 xfs rw,noatime 0 0 /dev/sdq1 /var/lib/ceph/osd/ceph-12 xfs rw,noatime 0 0 /dev/sdr1 /var/lib/ceph/osd/ceph-13 xfs rw,noatime 0 0 /dev/sds1 /var/lib/ceph/osd/ceph-14 xfs rw,noatime 0 0 /dev/sdt1 /var/lib/ceph/osd/ceph-15 xfs rw,noatime 0 0 ... Thanks in advance, piers Begin forwarded message: > From: Piers Dawson-Damer <[email protected]> > Subject: Troubleshooting down OSDs: Invalid command: ceph osd start osd.1 > Date: 19 September 2014 4:06:31 pm AEST > To: "[email protected]" <[email protected]> > > Has the command for manually starting and stopping OSDs changed? > > The documentation for troubleshooting OSDs > (http://docs.ceph.com/docs/master/rados/troubleshooting/troubleshooting-osd/) > mentions restarting OSDs with the command; > > ceph osd start osd.{num} > Yet I find, using Firefly 0.80.5 > > piers@sol:/etc/ceph$ ceph osd start osd.1 > no valid command found; 10 closest matches: > osd tier remove <poolname> <poolname> > osd tier cache-mode <poolname> none|writeback|forward|readonly > osd thrash <int[0-]> > osd tier add <poolname> <poolname> {--force-nonempty} > osd pool stats {<name>} > osd reweight-by-utilization {<int[100-]>} > osd pool set <poolname> > size|min_size|crash_replay_interval|pg_num|pgp_num|crush_ruleset|hashpspool|hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|debug_fake_ec_pool|target_max_bytes|target_max_objects|cache_target_dirty_ratio|cache_target_full_ratio|cache_min_flush_age|cache_min_evict_age|auid > <val> {--yes-i-really-mean-it} > osd pool set-quota <poolname> max_objects|max_bytes <val> > osd pool rename <poolname> <poolname> > osd pool get <poolname> > size|min_size|crash_replay_interval|pg_num|pgp_num|crush_ruleset|hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|auid > Error EINVAL: invalid command > >
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
