ThankYou Ilya!
I have built Centos6.5 kernel 3.6.3 using source linux-3.16.3.tar.gz from
www.kernel.org
[root@root ~]# uname -a
Linux root 3.16.3 #1 SMP Fri Oct 10 06:48:44 PDT 2014 x86_64 x86_64 x86_64
GNU/Linux
The kernel modules (includes rbd.ko hopefully…are still compiling….
Since building a FedoraCore20 Client hosts is much faster that building a
kernel and modules from sources.
I have built a FedoraCore20 Client hosts machine and below are the
results…Enjoy!!:
[root@localhost ceph]# uname -a
Linux localhost.localdomain 3.16.3-200.fc20.x86_64 #1 SMP Wed Sep 17 22:34:21
UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
Created RBD:
[root@root ceph]# rbd create rbd1 --size 40960 --pool vsmpool_hp1 -id admin
[root@root ceph]# rbd create rbd1 --size 40960 --pool vsmpool_perf1 -id admin
List the RBD’s:
[root@localhost ceph]# rbd ls vsmpool_hp1
rbd1
[root@localhost ceph]# rbd ls vsmpool_perf1
rbd1
[root@localhost ceph]# rbd map vsmpool_hp1/rbd1 --id admin
Successful…
Note: this is where we have an I/O error in Centos6.5 kernel 3.10.25
[root@localhost ceph]# rbd showmapped
id pool image snap device
0 vsmpool_hp1 rbd1 - /dev/rbd0
Format the RBD:
[root@localhost ceph]# mkfs.xfs /dev/rbd/vsmpool_hp1/rbd1
log stripe unit (4194304 bytes) is too large (maximum is 256KiB)
log stripe unit adjusted to 32KiB
meta-data=/dev/rbd/vsmpool_hp1/rbd1 isize=256 agcount=17, agsize=654336 blks
= sectsz=512 attr=2, projid32bit=1
= crc=0 finobt=0
data = bsize=4096 blocks=10485760, imaxpct=25
= sunit=1024 swidth=1024 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=0
log =internal log bsize=4096 blocks=5120, version=2
= sectsz=512 sunit=8 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Mount the RBD:
#mount /dev/rbd0 /media/test-target1/
Check Linux
[root@localhost ceph]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/fedora-root 41G 4.4G 35G 12% /
devtmpfs 995M 0 995M 0% /dev
tmpfs 1002M 136K 1001M 1% /dev/shm
tmpfs 1002M 760K 1001M 1% /run
tmpfs 1002M 0 1002M 0% /sys/fs/cgroup
tmpfs 1002M 12K 1002M 1% /tmp
/dev/sda1 477M 97M 351M 22% /boot
/dev/mapper/fedora-home 20G 49M 19G 1% /home
/dev/rbd0 40G 33M 40G 1% /media/test-target1
[root@localhost ceph]#
I’ll share results of centos6.5 running kernel 3.16.3 once module finish
compiling….
Enjoy!!!
Regards
Ben Aquino
-----Original Message-----
From: Ilya Dryomov [mailto:[email protected]]
Sent: Friday, October 10, 2014 10:29 AM
To: Aquino, Ben O
Cc: [email protected]; Ferber, Dan; Barnes, Thomas J
Subject: Re: [ceph-users] rbd map vsmpool_hp1/rbd9 --id admin -->rbd: add
failed: (5) Input/output error
On Fri, Oct 10, 2014 at 9:22 PM, Aquino, Ben O
<[email protected]<mailto:[email protected]>> wrote:
> Thanks Ilya,
> Will try to build client hosts with Centos7 running kernel 3.16.
Make sure it's 3.16.3 or later.
Thanks,
Ilya
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
