At least historically, high CPU usage and likely context switching and
lock contention have been the limiting factor during high IOPS workloads
on the test hardware at Inktank (and now RH). I ran benchmarks with a
parametric sweep of ceph parameters a while back on SSDs to see if
changing any of our tuning parameters had any unexpected benefits. I
didn't really see any obviously universally beneficial changes to our
default tunings. It's possible this has changed though with the work
that Somnath and others have been doing for Giant though.
Mark
On 10/17/2014 05:13 AM, Mark Wu wrote:
The client doesn't hit any bottleneck. I also tried to run multiple
clients on different host. There's no change.
2014-10-17 14:36 GMT+08:00 Alexandre DERUMIER <[email protected]
<mailto:[email protected]>>:
Hi,
>>Thanks for the detailed information. but I am already using fio with rbd
engine. Almost 4 volumes can reach the peak.
What is your cpu usage of fio-rbd ?
Myself I'm cpu bound on 8cores with around 40000iops read 4K.
----- Mail original -----
De: "Mark Wu" <[email protected] <mailto:[email protected]>>
À: "Daniel Schwager" <[email protected]
<mailto:[email protected]>>
Cc: [email protected] <mailto:[email protected]>
Envoyé: Jeudi 16 Octobre 2014 19:19:17
Objet: Re: [ceph-users] Performance doesn't scale well on a full ssd
cluster.
Thanks for the detailed information. but I am already using fio with
rbd engine. Almost 4 volumes can reach the peak.
2014 年 10 月 17 日 上午 1:03于 [email protected]
<mailto:[email protected]> 写道：
Thanks for the detailed information. but I am already using fio with
rbd engine. Almost 4 volumes can reach the peak.
2014 年 10 月 17 日 上午 12:55于 "Daniel Schwager" <
[email protected] <mailto:[email protected]> >写道：
<blockquote>
Hi Mark,
maybe you will check rbd-enabled fio
http://telekomcloud.github.io/ceph/2014/02/26/ceph-performance-analysis_fio_rbd.html
yum install ceph-devel
git clone git:// git.kernel.dk/fio.git <http://git.kernel.dk/fio.git>
cd fio ; ./configure ; make -j5 ; make install
Setup the number of jobs (==clients) inside fio config to
numjobs=8
for simulating multiple clients.
regards
Danny
my test.fio:
[global]
#logging
#write_iops_log=write_iops_log
#write_bw_log=write_bw_log
#write_lat_log=write_lat_log
ioengine=rbd
clientname=admin
pool=rbd
rbdname=myimage
invalidate=0 # mandatory
rw=randwrite
bs=1m
runtime=120
iodepth=8
numjobs=8
time_based
#direct=0
[seq-write]
stonewall
rw=write
#[seq-read]
#stonewall
#rw=read
</blockquote>
_______________________________________________
ceph-users mailing list
[email protected] <mailto:[email protected]>
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
