Hi Guys,
I got 3 MONs and 3 OSD’s configured via puppet but when trying to run MDS on
the MON servers, I am running into the error, which I can’t figure out.
BTW, I already manually installed MDS on cephmon001 and trying to install the
second MDS via puppet to see if I can have multiple MDS’s running at the same
time ( I am aware that only one MDS can be active at any given time in Firefly).
[jshah@Lab-cephmon002 mds]$ cat /etc/ceph/ceph.conf
[global]
osd_pool_default_pgp_num = 200
osd_pool_default_min_size = 1
auth_service_required = none
mon_initial_members = Lab-cephmon001, Lab-cephmon002, Lab-cephmon003
fsid = 2e738cda-1930-48cd-a4b1-74bc737c5d56
cluster_network =
auth_supported = none
auth_cluster_required = none
mon_host = X.X.16.111:6789, X.X.16.78:6789, X.X.16.115:6789
auth_client_required = none
osd_pool_default_size = 3
osd_pool_default_pg_num = 200
public_network = X.X.16.0/23
[mds]
mds_data = /var/lib/ceph/mds/mds.Lab-cephmon002
keyring = /var/lib/ceph/mds/mds.Lab-cephmon002/keyring
[jshah@Lab-cephmon002 mds]$ sudo service ceph start mds.Lab-cephmon002
/etc/init.d/ceph: mds.Lab-cephmon002 not found (/etc/ceph/ceph.conf defines
mon.Lab-cephmon002 mds.cephmon002 , /var/lib/ceph defines mon.Lab-cephmon002
mds.cephmon002)
[jshah@Lab-cephmon002 mds]$ ceph -s
cluster 2e738cda-1930-48cd-a4b1-74bc737c5d56
health HEALTH_WARN 192 pgs degraded; 192 pgs stuck unclean; recovery 40/60
objects degraded (66.667%)
monmap e2: 3 mons at
{Lab-cephmon001=X.X.16.111:6789/0,Lab-cephmon002=X.X.16.78:6789/0,Lab-cephmon003=X.X.16.115:6789/0},
election epoch 8, quorum 0,1,2 Lab-cephmon002,Lab-cephmon001,Lab-cephmon003
mdsmap e4: 1/1/1 up {0=Lab-cephmon001=up:active}
osdmap e49: 3 osds: 3 up, 2 in
pgmap v3926: 192 pgs, 3 pools, 2230 bytes data, 20 objects
16757 MB used, 4898 MB / 22863 MB avail
40/60 objects degraded (66.667%)
28 active+degraded
164 active+degraded+remapped
—Jiten
On Nov 10, 2014, at 8:58 AM, Francois Charlier <[email protected]> wrote:
> ----- Original Message -----
>> From: "JIten Shah" <[email protected]>
>> To: "Jean-Charles LOPEZ" <[email protected]>
>> Cc: "ceph-users" <[email protected]>
>> Sent: Friday, November 7, 2014 7:18:10 PM
>> Subject: Re: [ceph-users] Installing CephFs via puppet
>>
>> Thanks JC and Loic but we HAVE to use puppet. That’s how all of our
>> configuration and deployment stuff works and I can’t sway away from it.
>>
>> Is https://github.com/enovance/puppet-ceph a good resource for cephFS? Has
>> anyone used it successfully?
>>
>
> Hi,
>
> This module doesn't currently doesn't provide any mean to deploy CephFS.
> --
> François Charlier Software Engineer
> // eNovance SAS http://www.enovance.com/
> // ✉ [email protected] ☎ +33 1 49 70 99 81
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
