On Tue, Dec 16, 2014 at 6:19 AM, Cyan Cheng <cheng.1...@gmail.com> wrote:
> Dear All,
>
> We have set up ceph and used it for about one year already.
>
> Here is a summary of the setting. We used 3 servers to run the ceph.
>
> cs02, cs03, cs04
>
> Here is how we set up the ceph:
>
> 1. We created several OSDs on three of these servers. using command like:
>
>> ceph-deploy osd create cs02:/dev/sdc …. cs03:/dev/… cs04:/dev/….
>
> 2. And have created MDS on cs02:
>
>> ceph-deploy mds create ilab-cs02
>
> 3. After that, we have created a RADOS block device on cs02 by
>
>> rbd create rbd-research --size 10240000
>
> 4. Then mapped rbd-research
>
>> sudo tbd map rbd-resrearch —pool rbd
I assume that's "rbd map". Mapping images on the same physical box
that's also running OSDs works in general but isn't a very good idea.
>
> 5. Then make file system
>
>> sudo mkfs.ext4 /dev/rbd/rbd/rbd-research
>
> 6. Then mkdir and mount the rbd by adding this line to /etc/fstab
>
> /dev/rbd/rbd/rbd-research /mnt/retinadata ext4 defaults,users 0 2
>
> 7. Then mount
>
>> mount /mnt/retinadata
>
> It worked reliably until recently we had a power off of our servers
> accidentally.
>
> After power recovered. cs03, cs04 were automatically boot up, while cs02
> were not automatically boot up. There is a message shown on cs02 telling
> something like “not able to mount /mnt/retinadata, device not found, press S
> to ignore and continue booting, press M to manual configure”. We selected S
> and booted up the system.
>
> Then we found that, /mnt/retinadata was not mount and the rbd image at
> /dev/rbd/rbd/rbd1 was not there.
>
> We map the rbd image once again by.
>
>> sudo tbd map rbd-research —pool rbd
>
> Then we were able to mount /mnt/retinadata
>
> But the result we have now is :
> 1. All the file system structures are there.
> 2. All the files are of 0 byte size.
All files or just those that you (your system) were working with at the
time of the power reset?
>
> Could anybody help on this issue? Thank you very much in advance.
>
> Some more information. We tried to reboot cs02 again. And we see a full
> screen of error message like:
>
> [44038.215233] libceph: connect 192.168.1.31:6789 socket error on write
> [44038.215308] libceph: mon1 192.1.168.31:6789 error -101
> libceph: connect 192.168.1.41:6812 error -101
> libceph: osd22 192.168.1.41:6812 socket error on write
That's "Network is unreachable" so probably something's wrong with your
network.
Thanks,
Ilya
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
