Hi, The recovering start delay 300s after I stop a osd and the osd status change from in to out, the test ENV is Ceph 0.80.7
But I test in ceph 0.87.1, the recovering start immediately after I stop a OSD,all the settings is the default value,the following is mon_osd* settings in my test ENV: "mon_osd_laggy_halflife": "3600", "mon_osd_laggy_weight": "0.3", "mon_osd_adjust_heartbeat_grace": "true", "mon_osd_adjust_down_out_interval": "true", "mon_osd_auto_mark_in": "false", "mon_osd_auto_mark_auto_out_in": "true", "mon_osd_auto_mark_new_in": "true", "mon_osd_down_out_interval": "300", "mon_osd_down_out_subtree_limit": "rack", "mon_osd_min_up_ratio": "0.3", "mon_osd_min_in_ratio": "0.3", "mon_osd_max_op_age": "32", "mon_osd_max_split_count": "32", "mon_osd_allow_primary_temp": "false", "mon_osd_allow_primary_affinity": "false", "mon_osd_full_ratio": "0.95", "mon_osd_nearfull_ratio": "0.85", "mon_osd_report_timeout": "45000", "mon_osd_min_down_reporters": "50", "mon_osd_min_down_reports": "150", "mon_osd_force_trim_to": "0", so when the recovering start? why they are different with the two Ceph version, or someting wrong with my settings Thanks! Jian Li
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
