The best answer is:
http://ceph.com/docs/master/rados/configuration/network-config-ref/
I think that you should be able to know how each component communicates with
each other with that.
And this would be more help:
https://ceph.com/docs/v0.79/rados/operations/auth-intro/
Shinobu
----- Original Message -----
From: "MEGATEL / Rafał Gawron" <[email protected]>
To: [email protected]
Sent: Monday, September 7, 2015 6:57:55 PM
Subject: [ceph-users] Network failure
Hi !
My cluster network configuration:
ETH0 – access to system
IB0 – public network
IB1 – cluster network
How my cluster will work if network is down:
eth0 is down: I don’t have access over Ethernet to my system, but cluster works
good.
ib0 is down: clients don’t have access to cluster but data on cluster is safe –
yes ?
ib1 is down: what in this scenario ?
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
