Running 9.0.3 rados bench on a 9.0.3 cluster...
In the following experiments this cluster is only 2 osd nodes, 6 osds each
and a separate mon node (and a separate client running rados bench).
I have two pools populated with 4M objects. The pools are replicated x2
with identical parameters. The objects appear to be spread evenly across the
12 osds.
In all cases I drop caches on all nodes before doing a rados bench seq test.
In all cases I run rados bench seq for identical times (30 seconds) and in that
time
we do not run out of objects to read from the pool.
I am seeing significant bandwidth differences between the following:
* running a single instance of rados bench reading from one pool with 32
threads
(bandwidth approx 300)
* running two instances rados bench each reading from one of the two pools
with 16 threads per instance (combined bandwidth approx. 450)
I have already increased the following:
objecter_inflight_op_bytes = 104857600000
objecter_inflight_ops = 8192
ms_dispatch_throttle_bytes = 1048576000 #didn't seem to have any effect
The disks and network are not reaching anywhere near 100% utilization
What is the best way to diagnose what is throttling things in the one-instance
case?
-- Tom Deneau, AMD
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
