I downgraded to the hammer gitbuilder branch, but it looks like I've
passed the point of no return:
2015-10-06 09:44:52.210873 7fd3dd8b78c0 -1 ERROR: on disk data
includes unsupported features:
compat={},rocompat={},incompat={7=support shec erasure code}
2015-10-06 09:44:52.210922 7fd3dd8b78c0 -1 error checking features:
(1) Operation not permitted
----------------
Robert LeBlanc
PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654 3BB2 FA62 B9F1
On Tue, Oct 6, 2015 at 8:38 AM, Sage Weil <[email protected]> wrote:
> On Tue, 6 Oct 2015, Robert LeBlanc wrote:
>> Thanks for your time Sage. It sounds like a few people may be helped if you
>> can find something.
>>
>> I did a recursive chown as in the instructions (although I didn't know about
>> the doc at the time). I did an osd debug at 20/20 but didn't see anything.
>> I'll also do ms and make the logs available. I'll also review the document
>> to make sure I didn't miss anything else.
>
> Oh.. I bet you didn't upgrade the osds to 0.94.4 (or latest hammer build)
> first. They won't be allowed to boot until that happens... all upgrades
> must stop at 0.94.4 first. And that isn't released yet.. we'll try to
> do that today. In the meantime, you can use the hammer gitbuilder
> build...
>
> sage
>
>
>>
>> Robert LeBlanc
>>
>> Sent from a mobile device please excuse any typos.
>>
>> On Oct 6, 2015 6:37 AM, "Sage Weil" <[email protected]> wrote:
>> On Mon, 5 Oct 2015, Robert LeBlanc wrote:
>> > -----BEGIN PGP SIGNED MESSAGE-----
>> > Hash: SHA256
>> >
>> > With some off-list help, we have adjusted
>> > osd_client_message_cap=10000. This seems to have helped a bit
>> and we
>> > have seen some OSDs have a value up to 4,000 for client
>> messages. But
>> > it does not solve the problem with the blocked I/O.
>> >
>> > One thing that I have noticed is that almost exactly 30
>> seconds elapse
>> > between an OSD boots and the first blocked I/O message. I
>> don't know
>> > if the OSD doesn't have time to get it's brain right about a
>> PG before
>> > it starts servicing it or what exactly.
>>
>> I'm downloading the logs from yesterday now; sorry it's taking
>> so long.
>>
>> > On another note, I tried upgrading our CentOS dev cluster from
>> Hammer
>> > to master and things didn't go so well. The OSDs would not
>> start
>> > because /var/lib/ceph was not owned by ceph. I chowned the
>> directory
>> > and all OSDs and the OSD then started, but never became active
>> in the
>> > cluster. It just sat there after reading all the PGs. There
>> were
>> > sockets open to the monitor, but no OSD to OSD sockets. I
>> tried
>> > downgrading to the Infernalis branch and still no luck getting
>> the
>> > OSDs to come up. The OSD processes were idle after the initial
>> boot.
>> > All packages were installed from gitbuilder.
>>
>> Did you chown -R ?
>>
>>
>> https://github.com/ceph/ceph/blob/infernalis/doc/release-notes.rst#upgradin
>> g-from-hammer
>>
>> My guess is you only chowned the root dir, and the OSD didn't
>> throw
>> an error when it encountered the other files? If you can
>> generate a debug
>> osd = 20 log, that would be helpful.. thanks!
>>
>> sage
>>
>>
>> >
>> > Thanks,
>> > -----BEGIN PGP SIGNATURE-----
>> > Version: Mailvelope v1.2.0
>> > Comment: https://www.mailvelope.com
>> >
>> > wsFcBAEBCAAQBQJWE0F5CRDmVDuy+mK58QAAaCYQAJuFcCvRUJ46k0rYrMcc
>> > YlrSrGwS57GJS/JjaFHsvBV7KTobEMNeMkSv4PTGpwylNV9Dx4Ad74DDqX4g
>> > 6hZDe0rE+uEI7tW9Lqp+MN7eaU2lDuwLt/pOzZI14jTskUYTlNi3HjlN67mQ
>> > aiX1rbrJL6FFkuMOn/YqHpMbxI5ZOUZc1s7RDhASOPIs4z/CxpDfluW6fZA/
>> > y8C+pW6zzS9U/6jZwtGhBq4dvDBO41Lxb9WOehD8Aa/Qt6XNDzGw2KEkEkw7
>> > 8dBc7UFa2Wx3Tnzy238a/nKhtz6O6OrHsroA+HGWwCoxPWjOsz/xOoOmfwp+
>> > ALkY3id+t2uJEqzbL8/MgJ2RV1A+AZ7W1VWIJUOkDz0wR+KxQsxduHoD6rQy
>> > zg0fj2KSAlmVusYOPM1s1+jBsqNF3wcNxpbRoVuFqk0xMgGPrIdUNdZHg6bs
>> > D5sfkjNKexFe0ifFJ0cfv6UaGIKv4dK2eq3jUKgXHfh/qZmJbEB+zHaqJNyg
>> > CN6w6xu1FHLeVobKAWe5ZzKY5lxw6b8YG+ce/E2dvW73gSASPTvtv68gaT04
>> > 2SPF9Ql0fERL5EDY9Pc4MHpQVcS0XxxJA69CgnWgaG6fzq2eY7fALeMBVWlB
>> > fRj3zQwqJls/X8JZ3c4P4G0R6DP9bmMwGr++oYc3gWGrvgzxw3N7+ornd0jd
>> > GdXC
>> > =Aigq
>> > -----END PGP SIGNATURE-----
>> > ----------------
>> > Robert LeBlanc
>> > PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654 3BB2 FA62
>> B9F1
>> >
>> >
>> > On Sun, Oct 4, 2015 at 3:04 PM, Robert LeBlanc
>> <[email protected]> wrote:
>> > > -----BEGIN PGP SIGNED MESSAGE-----
>> > > Hash: SHA256
>> > >
>> > > I have eight nodes running the fio job rbd_test_real to
>> different RBD
>> > > volumes. I've included the CRUSH map in the tarball.
>> > >
>> > > I stopped one OSD process and marked it out. I let it
>> recover for a
>> > > few minutes and then I started the process again and marked
>> it in. I
>> > > started getting block I/O messages during the recovery.
>> > >
>> > > The logs are located at
>> http://162.144.87.113/files/ushou1.tar.xz
>> > >
>> > > Thanks,
>> > > -----BEGIN PGP SIGNATURE-----
>> > > Version: Mailvelope v1.2.0
>> > > Comment: https://www.mailvelope.com
>> > >
>> > > wsFcBAEBCAAQBQJWEZRcCRDmVDuy+mK58QAALbEQAK5pFiixJarUdLm50zp/
>> > > 3AGgGBPrieExKmoZZLCoMGfOLfxZDbN2ybtopKDQDfrTqndE/6Xi9UXqTOdW
>> > > jDc9U1wusgG0CKPsY1SMYnB9akvaDwtdh5q5k4VpN2zsG9R6lRojHeNQR3Nf
>> > > 56QevJL4/e5lC3sLhVnxXXi2XKnHCVOHT+PYgNour2ZWt6OTLoFFxuSU3zLN
>> > > OtfXgrFiiNF0mrDpm0gg2l8a8N5SwP9mM233S2U/JiGAqsqoqkfd0okjDenC
>> > > ksesU/n7zordFpfLN3yjL6+X9pQ4YA6otZrq4wWtjWKO/H0b+6iIsf/AE131
>> > > R6a4Vufndpd3Ce+FNfM+iu3FmKk0KVfDAaF/tIP6S6XUzGVMAbpvpmqNL17o
>> > > boh3wPZEyK+7KiF4Qlt2KoI/FV24Yj8XiyMnKin3MbMYbammb4ER977VH7iI
>> > > sZyelNPSsYmmw/MF+AkA5KVgzQ4DAPflaejIgC5uw3dYKrn2AQE5CE9nN8Gz
>> > > GVVaGItu1Bvrz21QoT9o5v0dZ85zttFvtrKIYgSi4mdpC6XkzUbg9s9EB1/T
>> > > SEY+fau7W7TtiLpzCAIQ3zDvgsvkx2P6tKg5U8e93LVv9B+YI8i8mUxxv1j5
>> > > PHFi7KTgRUPm1FPMJDSyzvOgqyMj9AzaESl1Na6k529ILFIcyfko0niTT1oZ
>> > > 3EPx
>> > > =UDIV
>> > > -----END PGP SIGNATURE-----
>> > >
>> > > ----------------
>> > > Robert LeBlanc
>> > > PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654 3BB2
>> FA62 B9F1
>> > >
>> > >
>> > > On Sun, Oct 4, 2015 at 7:48 AM, Sage Weil <[email protected]>
>> wrote:
>> > >> On Sat, 3 Oct 2015, Robert LeBlanc wrote:
>> > >>> -----BEGIN PGP SIGNED MESSAGE-----
>> > >>> Hash: SHA256
>> > >>>
>> > >>> We are still struggling with this and have tried a lot of
>> different
>> > >>> things. Unfortunately, Inktank (now Red Hat) no longer
>> provides
>> > >>> consulting services for non-Red Hat systems. If there are
>> some
>> > >>> certified Ceph consultants in the US that we can do both
>> remote and
>> > >>> on-site engagements, please let us know.
>> > >>>
>> > >>> This certainly seems to be network related, but somewhere
>> in the
>> > >>> kernel. We have tried increasing the network and TCP
>> buffers, number
>> > >>> of TCP sockets, reduced the FIN_WAIT2 state. There is
>> about 25% idle
>> > >>> on the boxes, the disks are busy, but not constantly at
>> 100% (they
>> > >>> cycle from <10% up to 100%, but not 100% for more than a
>> few seconds
>> > >>> at a time). There seems to be no reasonable explanation
>> why I/O is
>> > >>> blocked pretty frequently longer than 30 seconds. We have
>> verified
>> > >>> Jumbo frames by pinging from/to each node with 9000 byte
>> packets. The
>> > >>> network admins have verified that packets are not being
>> dropped in the
>> > >>> switches for these nodes. We have tried different kernels
>> including
>> > >>> the recent Google patch to cubic. This is showing up on
>> three cluster
>> > >>> (two Ethernet and one IPoIB). I booted one cluster into
>> Debian Jessie
>> > >>> (from CentOS 7.1) with similar results.
>> > >>>
>> > >>> The messages seem slightly different:
>> > >>> 2015-10-03 14:38:23.193082 osd.134 10.208.16.25:6800/1425
>> 439 :
>> > >>> cluster [WRN] 14 slow requests, 1 included below; oldest
>> blocked for >
>> > >>> 100.087155 secs
>> > >>> 2015-10-03 14:38:23.193090 osd.134 10.208.16.25:6800/1425
>> 440 :
>> > >>> cluster [WRN] slow request 30.041999 seconds old, received
>> at
>> > >>> 2015-10-03 14:37:53.151014:
>> osd_op(client.1328605.0:7082862
>> > >>> rbd_data.13fdcb2ae8944a.000000000001264f [read
>> 975360~4096]
>> > >>> 11.6d19c36f ack+read+known_if_redirected e10249) currently
>> no flag
>> > >>> points reached
>> > >>>
>> > >>> I don't know what "no flag points reached" means.
>> > >>
>> > >> Just that the op hasn't been marked as reaching any
>> interesting points
>> > >> (op->mark_*() calls).
>> > >>
>> > >> Is it possible to gather a lot with debug ms = 20 and debug
>> osd = 20?
>> > >> It's extremely verbose but it'll let us see where the op is
>> getting
>> > >> blocked. If you see the "slow request" message it means
>> the op in
>> > >> received by ceph (that's when the clock starts), so I
>> suspect it's not
>> > >> something we can blame on the network stack.
>> > >>
>> > >> sage
>> > >>
>> > >>
>> > >>>
>> > >>> The problem is most pronounced when we have to reboot an
>> OSD node (1
>> > >>> of 13), we will have hundreds of I/O blocked for some
>> times up to 300
>> > >>> seconds. It takes a good 15 minutes for things to settle
>> down. The
>> > >>> production cluster is very busy doing normally 8,000 I/O
>> and peaking
>> > >>> at 15,000. This is all 4TB spindles with SSD journals and
>> the disks
>> > >>> are between 25-50% full. We are currently splitting PGs to
>> distribute
>> > >>> the load better across the disks, but we are having to do
>> this 10 PGs
>> > >>> at a time as we get blocked I/O. We have max_backfills and
>> > >>> max_recovery set to 1, client op priority is set higher
>> than recovery
>> > >>> priority. We tried increasing the number of op threads but
>> this didn't
>> > >>> seem to help. It seems as soon as PGs are finished being
>> checked, they
>> > >>> become active and could be the cause for slow I/O while
>> the other PGs
>> > >>> are being checked.
>> > >>>
>> > >>> What I don't understand is that the messages are delayed.
>> As soon as
>> > >>> the message is received by Ceph OSD process, it is very
>> quickly
>> > >>> committed to the journal and a response is sent back to
>> the primary
>> > >>> OSD which is received very quickly as well. I've adjust
>> > >>> min_free_kbytes and it seems to keep the OSDs from
>> crashing, but
>> > >>> doesn't solve the main problem. We don't have swap and
>> there is 64 GB
>> > >>> of RAM per nodes for 10 OSDs.
>> > >>>
>> > >>> Is there something that could cause the kernel to get a
>> packet but not
>> > >>> be able to dispatch it to Ceph such that it could be
>> explaining why we
>> > >>> are seeing these blocked I/O for 30+ seconds. Is there
>> some pointers
>> > >>> to tracing Ceph messages from the network buffer through
>> the kernel to
>> > >>> the Ceph process?
>> > >>>
>> > >>> We can really use some pointers no matter how outrageous.
>> We've have
>> > >>> over 6 people looking into this for weeks now and just
>> can't think of
>> > >>> anything else.
>> > >>>
>> > >>> Thanks,
>> > >>> -----BEGIN PGP SIGNATURE-----
>> > >>> Version: Mailvelope v1.1.0
>> > >>> Comment: https://www.mailvelope.com
>> > >>>
>> > >>>
>> wsFcBAEBCAAQBQJWEDY1CRDmVDuy+mK58QAARgoP/RcoL1qVmg7qbQrzStar
>> > >>>
>> NK80bqYGeYHb26xHbt1fZVgnZhXU0nN0Dv4ew0e/cYJLELSO2KCeXNfXN6F1
>> > >>>
>> prZuzYagYEyj1Q1TOo+4h/nOQRYsTwQDdFzbHb/OUDN55C0QGZ29DjEvrqP6
>> > >>>
>> K5l6sAQzvQDpUEEIiOCkS6pH59ira740nSmnYkEWhr1lxF/hMjb6fFlfCFe2
>> > >>>
>> h1djM0GfY7vBHFGgI3jkw0BL5AQnWe+SCcCiKZmxY6xiR70FWl3XqK5M+nxm
>> > >>>
>> iq74y7Dv6cpenit6boMr6qtOeIt+8ko85hVMh09Hkaqz/m2FzxAKLcahzkGF
>> > >>>
>> Fh/M6YBzgnX7QBURTC4YQT/FVyDTW3JMuT3RKQdaX6c0iiOsVdkE+iyidWyY
>> > >>>
>> Hr1KzWU23Ur9yBfZ39Y43jrsSiAEwHnKjSqMowSGljdTysNEAAZQhlqZIoHb
>> > >>>
>> JlgpB39ugkHI1H5fZ5b2SIDz32/d5ywG4Gay9Rk6hp8VanvIrBbev+JYEoYT
>> > >>>
>> 8/WX+fhueHt4dqUYWIl3HZ0CEzbXbug0xmFvhrbmL2f3t9XOkDZRbAjlYrGm
>> > >>>
>> lswiJMDueY8JkxSnPvCQrHXqjbCcy9rMG7nTnLFz98rTcHNCwtpv0qVYhheg
>> > >>>
>> 4YRNRVMbfNP/6xsJvG1wVOSQPwxZSPqJh42pDqMRePJl3Zn66MTx5wvdNDpk
>> > >>> l7OF
>> > >>> =OI++
>> > >>> -----END PGP SIGNATURE-----
>> > >>> ----------------
>> > >>> Robert LeBlanc
>> > >>> PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654 3BB2
>> FA62 B9F1
>> > >>>
>> > >>>
>> > >>> On Fri, Sep 25, 2015 at 2:40 PM, Robert LeBlanc
>> <[email protected]> wrote:
>> > >>> > We dropped the replication on our cluster from 4 to 3
>> and it looks
>> > >>> > like all the blocked I/O has stopped (no entries in the
>> log for the
>> > >>> > last 12 hours). This makes me believe that there is some
>> issue with
>> > >>> > the number of sockets or some other TCP issue. We have
>> not messed with
>> > >>> > Ephemeral ports and TIME_WAIT at this point. There are
>> 130 OSDs, 8 KVM
>> > >>> > hosts hosting about 150 VMs. Open files is set at 32K
>> for the OSD
>> > >>> > processes and 16K system wide.
>> > >>> >
>> > >>> > Does this seem like the right spot to be looking? What
>> are some
>> > >>> > configuration items we should be looking at?
>> > >>> >
>> > >>> > Thanks,
>> > >>> > ----------------
>> > >>> > Robert LeBlanc
>> > >>> > PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654 3BB2
>> FA62 B9F1
>> > >>> >
>> > >>> >
>> > >>> > On Wed, Sep 23, 2015 at 1:30 PM, Robert LeBlanc
>> <[email protected]> wrote:
>> > >>> >> -----BEGIN PGP SIGNED MESSAGE-----
>> > >>> >> Hash: SHA256
>> > >>> >>
>> > >>> >> We were able to only get ~17Gb out of the XL710
>> (heavily tweaked)
>> > >>> >> until we went to the 4.x kernel where we got ~36Gb (no
>> tweaking). It
>> > >>> >> seems that there were some major reworks in the network
>> handling in
>> > >>> >> the kernel to efficiently handle that network rate. If
>> I remember
>> > >>> >> right we also saw a drop in CPU utilization. I'm
>> starting to think
>> > >>> >> that we did see packet loss while congesting our ISLs
>> in our initial
>> > >>> >> testing, but we could not tell where the dropping was
>> happening. We
>> > >>> >> saw some on the switches, but it didn't seem to be bad
>> if we weren't
>> > >>> >> trying to congest things. We probably already saw this
>> issue, just
>> > >>> >> didn't know it.
>> > >>> >> - ----------------
>> > >>> >> Robert LeBlanc
>> > >>> >> PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654
>> 3BB2 FA62 B9F1
>> > >>> >>
>> > >>> >>
>> > >>> >> On Wed, Sep 23, 2015 at 1:10 PM, Mark Nelson wrote:
>> > >>> >>> FWIW, we've got some 40GbE Intel cards in the
>> community performance cluster
>> > >>> >>> on a Mellanox 40GbE switch that appear (knock on wood)
>> to be running fine
>> > >>> >>> with 3.10.0-229.7.2.el7.x86_64. We did get feedback
>> from Intel that older
>> > >>> >>> drivers might cause problems though.
>> > >>> >>>
>> > >>> >>> Here's ifconfig from one of the nodes:
>> > >>> >>>
>> > >>> >>> ens513f1: flags=4163 mtu 1500
>> > >>> >>> inet 10.0.10.101 netmask 255.255.255.0
>> broadcast 10.0.10.255
>> > >>> >>> inet6 fe80::6a05:caff:fe2b:7ea1 prefixlen 64
>> scopeid 0x20
>> > >>> >>> ether 68:05:ca:2b:7e:a1 txqueuelen 1000
>> (Ethernet)
>> > >>> >>> RX packets 169232242875 bytes 229346261232279
>> (208.5 TiB)
>> > >>> >>> RX errors 0 dropped 0 overruns 0 frame 0
>> > >>> >>> TX packets 153491686361 bytes 203976410836881
>> (185.5 TiB)
>> > >>> >>> TX errors 0 dropped 0 overruns 0 carrier 0
>> collisions 0
>> > >>> >>>
>> > >>> >>> Mark
>> > >>> >>>
>> > >>> >>>
>> > >>> >>> On 09/23/2015 01:48 PM, Robert LeBlanc wrote:
>> > >>> >>>>
>> > >>> >>>> -----BEGIN PGP SIGNED MESSAGE-----
>> > >>> >>>> Hash: SHA256
>> > >>> >>>>
>> > >>> >>>> OK, here is the update on the saga...
>> > >>> >>>>
>> > >>> >>>> I traced some more of blocked I/Os and it seems that
>> communication
>> > >>> >>>> between two hosts seemed worse than others. I did a
>> two way ping flood
>> > >>> >>>> between the two hosts using max packet sizes (1500).
>> After 1.5M
>> > >>> >>>> packets, no lost pings. Then then had the ping flood
>> running while I
>> > >>> >>>> put Ceph load on the cluster and the dropped pings
>> started increasing
>> > >>> >>>> after stopping the Ceph workload the pings stopped
>> dropping.
>> > >>> >>>>
>> > >>> >>>> I then ran iperf between all the nodes with the same
>> results, so that
>> > >>> >>>> ruled out Ceph to a large degree. I then booted in
>> the the
>> > >>> >>>> 3.10.0-229.14.1.el7.x86_64 kernel and with an hour
>> test so far there
>> > >>> >>>> hasn't been any dropped pings or blocked I/O. Our 40
>> Gb NICs really
>> > >>> >>>> need the network enhancements in the 4.x series to
>> work well.
>> > >>> >>>>
>> > >>> >>>> Does this sound familiar to anyone? I'll probably
>> start bisecting the
>> > >>> >>>> kernel to see where this issue in introduced. Both of
>> the clusters
>> > >>> >>>> with this issue are running 4.x, other than that,
>> they are pretty
>> > >>> >>>> differing hardware and network configs.
>> > >>> >>>>
>> > >>> >>>> Thanks,
>> > >>> >>>> -----BEGIN PGP SIGNATURE-----
>> > >>> >>>> Version: Mailvelope v1.1.0
>> > >>> >>>> Comment: https://www.mailvelope.com
>> > >>> >>>>
>> > >>> >>>>
>> wsFcBAEBCAAQBQJWAvOzCRDmVDuy+mK58QAApOMP/1xmCtW++G11qcE8y/sr
>> > >>> >>>>
>> RkXguqZJLc4czdOwV/tjUvhVsm5qOl4wvQCtABFZpc6t4+m5nzE3LkA1rl2l
>> > >>> >>>>
>> AnARPOjh61TO6cV0CT8O0DlqtHmSd2y0ElgAUl0594eInEn7eI7crz8R543V
>> > >>> >>>>
>> 7I68XU5zL/vNJ9IIx38UqdhtSzXQQL664DGq3DLINK0Yb9XRVBlFip+Slt+j
>> > >>> >>>>
>> cB64TuWjOPLSH09pv7SUyksodqrTq3K7p6sQkq0MOzBkFQM1FHfOipbo/LYv
>> > >>> >>>>
>> F42iiQbCvFizArMu20WeOSQ4dmrXT/iecgTfEag/Zxvor2gOi/J6d2XS9ckW
>> > >>> >>>>
>> byEC5/rbm4yDBua2ZugeNxQLWq0Oa7spZnx7usLsu/6YzeDNI6kmtGURajdE
>> > >>> >>>>
>> /XC8bESWKveBzmGDzjff5oaMs9A1PZURYnlYADEODGAt6byoaoQEGN6dlFGe
>> > >>> >>>>
>> LwQ5nOdQYuUrWpJzTJBN3aduOxursoFY8S0eR0uXm0l1CHcp22RWBDvRinok
>> > >>> >>>>
>> UWk5xRBgjDCD2gIwc+wpImZbCtiTdf0vad1uLvdxGL29iFta4THzJgUGrp98
>> > >>> >>>>
>> sUqM3RaTRdJYjFcNP293H7/DC0mqpnmo0Clx3jkdHX+x1EXpJUtocSeI44LX
>> > >>> >>>>
>> KWIMhe9wXtKAoHQFEcJ0o0+wrXWMevvx33HPC4q1ULrFX0ILNx5Mo0Rp944X
>> > >>> >>>> 4OEo
>> > >>> >>>> =P33I
>> > >>> >>>> -----END PGP SIGNATURE-----
>> > >>> >>>> ----------------
>> > >>> >>>> Robert LeBlanc
>> > >>> >>>> PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654
>> 3BB2 FA62 B9F1
>> > >>> >>>>
>> > >>> >>>>
>> > >>> >>>> On Tue, Sep 22, 2015 at 4:15 PM, Robert LeBlanc
>> > >>> >>>> wrote:
>> > >>> >>>>>
>> > >>> >>>>> -----BEGIN PGP SIGNED MESSAGE-----
>> > >>> >>>>> Hash: SHA256
>> > >>> >>>>>
>> > >>> >>>>> This is IPoIB and we have the MTU set to 64K. There
>> was some issues
>> > >>> >>>>> pinging hosts with "No buffer space available"
>> (hosts are currently
>> > >>> >>>>> configured for 4GB to test SSD caching rather than
>> page cache). I
>> > >>> >>>>> found that MTU under 32K worked reliable for ping,
>> but still had the
>> > >>> >>>>> blocked I/O.
>> > >>> >>>>>
>> > >>> >>>>> I reduced the MTU to 1500 and checked pings (OK),
>> but I'm still seeing
>> > >>> >>>>> the blocked I/O.
>> > >>> >>>>> - ----------------
>> > >>> >>>>> Robert LeBlanc
>> > >>> >>>>> PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654
>> 3BB2 FA62 B9F1
>> > >>> >>>>>
>> > >>> >>>>>
>> > >>> >>>>> On Tue, Sep 22, 2015 at 3:52 PM, Sage Weil wrote:
>> > >>> >>>>>>
>> > >>> >>>>>> On Tue, 22 Sep 2015, Samuel Just wrote:
>> > >>> >>>>>>>
>> > >>> >>>>>>> I looked at the logs, it looks like there was a 53
>> second delay
>> > >>> >>>>>>> between when osd.17 started sending the osd_repop
>> message and when
>> > >>> >>>>>>> osd.13 started reading it, which is pretty weird.
>> Sage, didn't we
>> > >>> >>>>>>> once see a kernel issue which caused some messages
>> to be mysteriously
>> > >>> >>>>>>> delayed for many 10s of seconds?
>> > >>> >>>>>>
>> > >>> >>>>>>
>> > >>> >>>>>> Every time we have seen this behavior and diagnosed
>> it in the wild it
>> > >>> >>>>>> has
>> > >>> >>>>>> been a network misconfiguration. Usually related
>> to jumbo frames.
>> > >>> >>>>>>
>> > >>> >>>>>> sage
>> > >>> >>>>>>
>> > >>> >>>>>>
>> > >>> >>>>>>>
>> > >>> >>>>>>> What kernel are you running?
>> > >>> >>>>>>> -Sam
>> > >>> >>>>>>>
>> > >>> >>>>>>> On Tue, Sep 22, 2015 at 2:22 PM, Robert LeBlanc
>> wrote:
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>> > >>> >>>>>>>> Hash: SHA256
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> OK, looping in ceph-devel to see if I can get
>> some more eyes. I've
>> > >>> >>>>>>>> extracted what I think are important entries from
>> the logs for the
>> > >>> >>>>>>>> first blocked request. NTP is running all the
>> servers so the logs
>> > >>> >>>>>>>> should be close in terms of time. Logs for 12:50
>> to 13:00 are
>> > >>> >>>>>>>> available at
>> http://162.144.87.113/files/ceph_block_io.logs.tar.xz
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> 2015-09-22 12:55:06.500374 - osd.17 gets I/O from
>> client
>> > >>> >>>>>>>> 2015-09-22 12:55:06.557160 - osd.17 submits I/O
>> to osd.13
>> > >>> >>>>>>>> 2015-09-22 12:55:06.557305 - osd.17 submits I/O
>> to osd.16
>> > >>> >>>>>>>> 2015-09-22 12:55:06.573711 - osd.16 gets I/O from
>> osd.17
>> > >>> >>>>>>>> 2015-09-22 12:55:06.595716 - osd.17 gets ondisk
>> result=0 from osd.16
>> > >>> >>>>>>>> 2015-09-22 12:55:06.640631 - osd.16 reports to
>> osd.17 ondisk result=0
>> > >>> >>>>>>>> 2015-09-22 12:55:36.926691 - osd.17 reports slow
>> I/O > 30.439150 sec
>> > >>> >>>>>>>> 2015-09-22 12:55:59.790591 - osd.13 gets I/O from
>> osd.17
>> > >>> >>>>>>>> 2015-09-22 12:55:59.812405 - osd.17 gets ondisk
>> result=0 from osd.13
>> > >>> >>>>>>>> 2015-09-22 12:56:02.941602 - osd.13 reports to
>> osd.17 ondisk result=0
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> In the logs I can see that osd.17 dispatches the
>> I/O to osd.13 and
>> > >>> >>>>>>>> osd.16 almost silmutaniously. osd.16 seems to get
>> the I/O right away,
>> > >>> >>>>>>>> but for some reason osd.13 doesn't get the
>> message until 53 seconds
>> > >>> >>>>>>>> later. osd.17 seems happy to just wait and
>> doesn't resend the data
>> > >>> >>>>>>>> (well, I'm not 100% sure how to tell which
>> entries are the actual data
>> > >>> >>>>>>>> transfer).
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> It looks like osd.17 is receiving responses to
>> start the communication
>> > >>> >>>>>>>> with osd.13, but the op is not acknowledged until
>> almost a minute
>> > >>> >>>>>>>> later. To me it seems that the message is getting
>> received but not
>> > >>> >>>>>>>> passed to another thread right away or something.
>> This test was done
>> > >>> >>>>>>>> with an idle cluster, a single fio client (rbd
>> engine) with a single
>> > >>> >>>>>>>> thread.
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> The OSD servers are almost 100% idle during these
>> blocked I/O
>> > >>> >>>>>>>> requests. I think I'm at the end of my
>> troubleshooting, so I can use
>> > >>> >>>>>>>> some help.
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> Single Test started about
>> > >>> >>>>>>>> 2015-09-22 12:52:36
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> 2015-09-22 12:55:36.926680 osd.17
>> 192.168.55.14:6800/16726 56 :
>> > >>> >>>>>>>> cluster [WRN] 1 slow requests, 1 included below;
>> oldest blocked for >
>> > >>> >>>>>>>> 30.439150 secs
>> > >>> >>>>>>>> 2015-09-22 12:55:36.926699 osd.17
>> 192.168.55.14:6800/16726 57 :
>> > >>> >>>>>>>> cluster [WRN] slow request 30.439150 seconds old,
>> received at
>> > >>> >>>>>>>> 2015-09-22 12:55:06.487451:
>> > >>> >>>>>>>> osd_op(client.250874.0:1388
>> rbd_data.3380e2ae8944a.0000000000000545
>> > >>> >>>>>>>> [set-alloc-hint object_size 4194304 write_size
>> 4194304,write
>> > >>> >>>>>>>> 0~4194304] 8.bbf3e8ff
>> ack+ondisk+write+known_if_redirected e56785)
>> > >>> >>>>>>>> currently waiting for subops from 13,16
>> > >>> >>>>>>>> 2015-09-22 12:55:36.697904 osd.16
>> 192.168.55.13:6800/29410 7 : cluster
>> > >>> >>>>>>>> [WRN] 2 slow requests, 2 included below; oldest
>> blocked for >
>> > >>> >>>>>>>> 30.379680 secs
>> > >>> >>>>>>>> 2015-09-22 12:55:36.697918 osd.16
>> 192.168.55.13:6800/29410 8 : cluster
>> > >>> >>>>>>>> [WRN] slow request 30.291520 seconds old,
>> received at 2015-09-22
>> > >>> >>>>>>>> 12:55:06.406303:
>> > >>> >>>>>>>> osd_op(client.250874.0:1384
>> rbd_data.3380e2ae8944a.0000000000000541
>> > >>> >>>>>>>> [set-alloc-hint object_size 4194304 write_size
>> 4194304,write
>> > >>> >>>>>>>> 0~4194304] 8.5fb2123f
>> ack+ondisk+write+known_if_redirected e56785)
>> > >>> >>>>>>>> currently waiting for subops from 13,17
>> > >>> >>>>>>>> 2015-09-22 12:55:36.697927 osd.16
>> 192.168.55.13:6800/29410 9 : cluster
>> > >>> >>>>>>>> [WRN] slow request 30.379680 seconds old,
>> received at 2015-09-22
>> > >>> >>>>>>>> 12:55:06.318144:
>> > >>> >>>>>>>> osd_op(client.250874.0:1382
>> rbd_data.3380e2ae8944a.000000000000053f
>> > >>> >>>>>>>> [set-alloc-hint object_size 4194304 write_size
>> 4194304,write
>> > >>> >>>>>>>> 0~4194304] 8.312e69ca
>> ack+ondisk+write+known_if_redirected e56785)
>> > >>> >>>>>>>> currently waiting for subops from 13,14
>> > >>> >>>>>>>> 2015-09-22 12:58:03.998275 osd.13
>> 192.168.55.12:6804/4574 130 :
>> > >>> >>>>>>>> cluster [WRN] 1 slow requests, 1 included below;
>> oldest blocked for >
>> > >>> >>>>>>>> 30.954212 secs
>> > >>> >>>>>>>> 2015-09-22 12:58:03.998286 osd.13
>> 192.168.55.12:6804/4574 131 :
>> > >>> >>>>>>>> cluster [WRN] slow request 30.954212 seconds old,
>> received at
>> > >>> >>>>>>>> 2015-09-22 12:57:33.044003:
>> > >>> >>>>>>>> osd_op(client.250874.0:1873
>> rbd_data.3380e2ae8944a.000000000000070d
>> > >>> >>>>>>>> [set-alloc-hint object_size 4194304 write_size
>> 4194304,write
>> > >>> >>>>>>>> 0~4194304] 8.e69870d4
>> ack+ondisk+write+known_if_redirected e56785)
>> > >>> >>>>>>>> currently waiting for subops from 16,17
>> > >>> >>>>>>>> 2015-09-22 12:58:03.759826 osd.16
>> 192.168.55.13:6800/29410 10 :
>> > >>> >>>>>>>> cluster [WRN] 1 slow requests, 1 included below;
>> oldest blocked for >
>> > >>> >>>>>>>> 30.704367 secs
>> > >>> >>>>>>>> 2015-09-22 12:58:03.759840 osd.16
>> 192.168.55.13:6800/29410 11 :
>> > >>> >>>>>>>> cluster [WRN] slow request 30.704367 seconds old,
>> received at
>> > >>> >>>>>>>> 2015-09-22 12:57:33.055404:
>> > >>> >>>>>>>> osd_op(client.250874.0:1874
>> rbd_data.3380e2ae8944a.000000000000070e
>> > >>> >>>>>>>> [set-alloc-hint object_size 4194304 write_size
>> 4194304,write
>> > >>> >>>>>>>> 0~4194304] 8.f7635819
>> ack+ondisk+write+known_if_redirected e56785)
>> > >>> >>>>>>>> currently waiting for subops from 13,17
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> Server IP addr OSD
>> > >>> >>>>>>>> nodev - 192.168.55.11 - 12
>> > >>> >>>>>>>> nodew - 192.168.55.12 - 13
>> > >>> >>>>>>>> nodex - 192.168.55.13 - 16
>> > >>> >>>>>>>> nodey - 192.168.55.14 - 17
>> > >>> >>>>>>>> nodez - 192.168.55.15 - 14
>> > >>> >>>>>>>> nodezz - 192.168.55.16 - 15
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> fio job:
>> > >>> >>>>>>>> [rbd-test]
>> > >>> >>>>>>>> readwrite=write
>> > >>> >>>>>>>> blocksize=4M
>> > >>> >>>>>>>> #runtime=60
>> > >>> >>>>>>>> name=rbd-test
>> > >>> >>>>>>>> #readwrite=randwrite
>> > >>> >>>>>>>>
>> #bssplit=4k/85:32k/11:512/3:1m/1,4k/89:32k/10:512k/1
>> > >>> >>>>>>>> #rwmixread=72
>> > >>> >>>>>>>> #norandommap
>> > >>> >>>>>>>> #size=1T
>> > >>> >>>>>>>> #blocksize=4k
>> > >>> >>>>>>>> ioengine=rbd
>> > >>> >>>>>>>> rbdname=test2
>> > >>> >>>>>>>> pool=rbd
>> > >>> >>>>>>>> clientname=admin
>> > >>> >>>>>>>> iodepth=8
>> > >>> >>>>>>>> #numjobs=4
>> > >>> >>>>>>>> #thread
>> > >>> >>>>>>>> #group_reporting
>> > >>> >>>>>>>> #time_based
>> > >>> >>>>>>>> #direct=1
>> > >>> >>>>>>>> #ramp_time=60
>> > >>> >>>>>>>>
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> Thanks,
>> > >>> >>>>>>>> -----BEGIN PGP SIGNATURE-----
>> > >>> >>>>>>>> Version: Mailvelope v1.1.0
>> > >>> >>>>>>>> Comment: https://www.mailvelope.com
>> > >>> >>>>>>>>
>> > >>> >>>>>>>>
>> wsFcBAEBCAAQBQJWAcaKCRDmVDuy+mK58QAAPMsQAKBnS94fwuw0OqpPU3/z
>> > >>> >>>>>>>>
>> tL8Z6TVRxrNigf721+2ClIu4LIH71bupDc3DgrrysQmmqGuvEMn68spmasWu
>> > >>> >>>>>>>>
>> h9I/CqqgRpHqe4lUVoUEjyWA9/6Dbb6NiHSdpJ6p5jpGc8kZCvNS+ocDgFOl
>> > >>> >>>>>>>>
>> 903i0M0E9eEMeci5O/hrMrx1FG8SN2LS8nI261aNHMOwQK0bw8wWiCJEvqVB
>> > >>> >>>>>>>>
>> sz1/+jK1BJoeIYfaT9HfUXBAvfo/W3tY/vj9KbJuZJ5AMpeYPvEHu/LAr1N7
>> > >>> >>>>>>>>
>> FzzUc7a6EMlaxmSd0ML49JbV0cY9BMDjfrkKEQNKlzszlEHm3iif98QtsxbF
>> > >>> >>>>>>>>
>> pPJ0hZ0G53BY3k976OWVMFm3WFRWUVOb/oiLF8H6PCm59b4LBNAg6iPNH1AI
>> > >>> >>>>>>>>
>> 5XhEcPpg06M03vqUaIiY9P1kQlvnn0yCXf82IUEgmg///vhxDsHWmcwClLEn
>> > >>> >>>>>>>>
>> B0VszouStTzlMYnc/2vlUiI4gFVeilWLMW00VGTWV+7V1oIzIYvWHyl2QpBq
>> > >>> >>>>>>>>
>> 4/ZwVjQ43qLfuDTS4o+IJ4ztOMd26vIv6Mn6WVwKCjoCXJc8ajywR9Dy+6lL
>> > >>> >>>>>>>>
>> o8oJ+tn7hMc9Qy1iBhu3/QIP4WCsUf9RVeu60oahNEpde89qW32S9CZlrJDO
>> > >>> >>>>>>>>
>> gf4iTryRjkAhdmZIj9JiaE8jQ6dvN817D9cqs/CXKV9vhzYoM7p5YWHghBKB
>> > >>> >>>>>>>> J3hS
>> > >>> >>>>>>>> =0J7F
>> > >>> >>>>>>>> -----END PGP SIGNATURE-----
>> > >>> >>>>>>>> ----------------
>> > >>> >>>>>>>> Robert LeBlanc
>> > >>> >>>>>>>> PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E
>> E654 3BB2 FA62 B9F1
>> > >>> >>>>>>>>
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> On Tue, Sep 22, 2015 at 8:31 AM, Gregory Farnum
>> wrote:
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>> On Tue, Sep 22, 2015 at 7:24 AM, Robert LeBlanc
>> wrote:
>> > >>> >>>>>>>>>>
>> > >>> >>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>> > >>> >>>>>>>>>> Hash: SHA256
>> > >>> >>>>>>>>>>
>> > >>> >>>>>>>>>> Is there some way to tell in the logs that this
>> is happening?
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>> You can search for the (mangled) name
>> _split_collection
>> > >>> >>>>>>>>>>
>> > >>> >>>>>>>>>> I'm not
>> > >>> >>>>>>>>>> seeing much I/O, CPU usage during these times.
>> Is there some way to
>> > >>> >>>>>>>>>> prevent the splitting? Is there a negative side
>> effect to doing so?
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>> Bump up the split and merge thresholds. You can
>> search the list for
>> > >>> >>>>>>>>> this, it was discussed not too long ago.
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>>> We've had I/O block for over 900 seconds and as
>> soon as the sessions
>> > >>> >>>>>>>>>> are aborted, they are reestablished and
>> complete immediately.
>> > >>> >>>>>>>>>>
>> > >>> >>>>>>>>>> The fio test is just a seq write, starting it
>> over (rewriting from
>> > >>> >>>>>>>>>> the
>> > >>> >>>>>>>>>> beginning) is still causing the issue. I was
>> suspect that it is not
>> > >>> >>>>>>>>>> having to create new file and therefore split
>> collections. This is
>> > >>> >>>>>>>>>> on
>> > >>> >>>>>>>>>> my test cluster with no other load.
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>> Hmm, that does make it seem less likely if
>> you're really not creating
>> > >>> >>>>>>>>> new objects, if you're actually running fio in
>> such a way that it's
>> > >>> >>>>>>>>> not allocating new FS blocks (this is probably
>> hard to set up?).
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>>>
>> > >>> >>>>>>>>>> I'll be doing a lot of testing today. Which log
>> options and depths
>> > >>> >>>>>>>>>> would be the most helpful for tracking this
>> issue down?
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>>
>> > >>> >>>>>>>>> If you want to go log diving "debug osd = 20",
>> "debug filestore =
>> > >>> >>>>>>>>> 20",
>> > >>> >>>>>>>>> "debug ms = 1" are what the OSD guys like to
>> see. That should spit
>> > >>> >>>>>>>>> out
>> > >>> >>>>>>>>> everything you need to track exactly what each
>> Op is doing.
>> > >>> >>>>>>>>> -Greg
>> > >>> >>>>>>>>
>> > >>> >>>>>>>> --
>> > >>> >>>>>>>> To unsubscribe from this list: send the line
>> "unsubscribe ceph-devel"
>> > >>> >>>>>>>> in
>> > >>> >>>>>>>> the body of a message to
>> [email protected]
>> > >>> >>>>>>>> More majordomo info at
>> http://vger.kernel.org/majordomo-info.html
>> > >>> >>>>>>>
>> > >>> >>>>>>>
>> > >>> >>>>>>>
>> > >>> >>>>>
>> > >>> >>>>> -----BEGIN PGP SIGNATURE-----
>> > >>> >>>>> Version: Mailvelope v1.1.0
>> > >>> >>>>> Comment: https://www.mailvelope.com
>> > >>> >>>>>
>> > >>> >>>>>
>> wsFcBAEBCAAQBQJWAdMSCRDmVDuy+mK58QAAoEgP/AqpH7i1BLpoz6fTlfWG
>> > >>> >>>>>
>> a6swvF8xvsyR15PDiPINYT0N7MgoikikGrMmhWpJ6utEr1XPW0MPFgzvNIsf
>> > >>> >>>>>
>> a1eMtNzyww4rAo6JCq6BtjmUsSKmOrBNhRNr6It9v4Nv+biqZHkiY8x/rRtV
>> > >>> >>>>>
>> s9z0cv3Q9Wqa6y/zKZg3H1XtbtUAx0r/DUwzSsP3omupZgNyaKkCgdkil9Vc
>> > >>> >>>>>
>> iyzBxFZU4+qXNT2FBG4dYDjxSHQv4psjvKR3AWXSN4yEn286KyMDjFrsDY5B
>> > >>> >>>>>
>> izS3h603QPoErqsUQngDE8COcaTAHHrV7gNJTikmGoNW6oQBjFq/z/zindTz
>> > >>> >>>>>
>> caXshVQQ+OTLo/qzJM8QPswh0TGU74SVbDkTq+eTOb5pBhQbp+42Pkkqh7jj
>> > >>> >>>>>
>> efyyYgDzpB1WrWRbUlWMNqmnjq7DT3lnAtuHyKbkwVs8x3JMPEiCl6PBvJbx
>> > >>> >>>>>
>> GnNSCqgDJrpb4fHQ2iqfQeh8Ai6AL1C1Ai19RZPrAUhpDW0/DbUvuoKSR8m7
>> > >>> >>>>>
>> glYYuH3hpy+oPYRhFcHm2fpNJ3u9npyk2Dai9RpzQ+mWmp3xi7becYmL482H
>> > >>> >>>>>
>> +WyvLeY+8AiJQDpA0CdD8KeSlOC9bw5TPmihAIn9dVTJ1O2RlapCLqL3YAJg
>> > >>> >>>>>
>> pGyDs8ercTEJLmvEyElj5XWh5DarsGscd2LELNS/UpyuYurbPcyPKUQ0uPjp
>> > >>> >>>>> gcZm
>> > >>> >>>>> =CjwB
>> > >>> >>>>> -----END PGP SIGNATURE-----
>> > >>> >>>>
>> > >>> >>>> --
>> > >>> >>>> To unsubscribe from this list: send the line
>> "unsubscribe ceph-devel" in
>> > >>> >>>> the body of a message to [email protected]
>> > >>> >>>> More majordomo info at
>> http://vger.kernel.org/majordomo-info.html
>> > >>> >>>>
>> > >>> >>>
>> > >>> >>
>> > >>> >> -----BEGIN PGP SIGNATURE-----
>> > >>> >> Version: Mailvelope v1.1.0
>> > >>> >> Comment: https://www.mailvelope.com
>> > >>> >>
>> > >>> >>
>> wsFcBAEBCAAQBQJWAv3QCRDmVDuy+mK58QAABr4QAJcQj8zjl606aMdkmQG7
>> > >>> >>
>> S46iMXVav/Tv2os9GCUsQmMPx2u1w3/WmPfjByd6Divczfo0JLDDqrbsqre2
>> > >>> >>
>> lq0GNK6e8fq6FXHhPpnL+t4uFV4UZ289cma3yklRqEBDXWHlP59Hu7VpxC5l
>> > >>> >>
>> 0MIcCg4wM5VM/LkrfcMven5em5CnjyFJYbActGzw9043rZoyUwCM+eL7sotl
>> > >>> >>
>> JYHMcNWnqwdt8TLFDhUfVGiAQyV8/6E33CuCNUEuFGdtiBKzs9IZadOI8Ce0
>> > >>> >>
>> dod2DQNyFSvomqNq6t0DuTCSA+pT8uuks2O0NcrHjoqwIWVkxQGPYlpbpckf
>> > >>> >>
>> nxQdVM7vkqapVeQ0qUZx43Db9A5wDTC3PaEfVJZPZzWsSDjh9z7o6qHs3Kvp
>> > >>> >>
>> krfyS+dJaZ3tOYAP1VFDfasj06sOTFu3mfGYToKA75zz5HN7QZ13Zau/qhDu
>> > >>> >>
>> FHxsgk4oIXJsjj22LiSpoiigH5Ls+aVqtIbg8/vWp+EO6pK1fovEtJVeGAfE
>> > >>> >>
>> tLOdxfJJLVjMCAScFG9BRl1ePPLeptivKV0v9ruWsTpn+Q96VtqAR5GQCkYE
>> > >>> >>
>> hFrlxM+oIzHeArhhiIxSPCYLlnzxoD5IYXmTrWUYBCGvlY1mrI3j80mZ4VTj
>> > >>> >>
>> BErsSlqnjUyFKmaI7YNKyARCloMroz3wqdy/wpg/63Io62nmh5IyY+WO8hPo
>> > >>> >> ae22
>> > >>> >> =AX+L
>> > >>> >> -----END PGP SIGNATURE-----
>> > >>> _______________________________________________
>> > >>> ceph-users mailing list
>> > >>> [email protected]
>> > >>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>> > >>>
>> > >>>
>> > _______________________________________________
>> > ceph-users mailing list
>> > [email protected]
>> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>> >
>> >
>>
>>
>>
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
