On Sun, Nov 29, 2015 at 11:51 AM, Somnath Roy <[email protected]> wrote:
> traceroute Hi Somnath, Thanks for the quick response. My MTU is the default one that is 1500 *1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:04:de:fc brd ff:ff:ff:ff:ff:ff inet 10.176.128.135/24 <http://10.176.128.135/24> brd 10.176.128.255 scope global ens3 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe04:defc/64 scope link valid_lft forever preferred_lft forever* Also my all nodes are reachable from each other. One Observation: I am creating the file using the dd command as follows: *dd if=/dev/zero of=$FILE.txt bs=100MB count=2 conv=fdatasync* So the file size is 200MB. For this size I am getting fault errors. But for 2GB file upload, I am not getting the fault errors. Command as follows: *dd if=/dev/zero of=$FILE.txt bs=256MB count=8 conv=fdatasync* Thanks & Regards Prasad Pande
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
