Hi Ceph users
This is my first post on this mailing list. Hope it's the correct one. Please
redirect me to the right place in case it is not.
I am running a small (3 nodes with 3 OSD and 1 monitor on each of them) Ceph
cluster.
Guess what, it is used as Cinder/Glance/Nova RDB storage for OpenStack.
I already replaced some single OSD (faulty disk) without any problems.
Now I am facing another problem since the system disk on one of the 3 nodes
failed.
So I thought to take the 3 OSDs of this node out of the cluster, set up the
node from scratch and add the 3 OSDs again.
I did successfully take out the first 2 OSDs.
Yes I hit the corner case, I did it with " ceph osd crush reweight
osd.<OSD#>0.0", waited for active+clean and followed by "ceph osd out <OSD#>"
Status is now:
cluster d1af2097-8535-42f2-ba8c-0667f90cab61
health HEALTH_WARN
too many PGs per OSD (329 > max 300)
1 mons down, quorum 0,2 ceph0,ceph2
monmap e1: 3 mons at
{ceph0=10.0.0.30:6789/0,ceph1=10.0.0.31:6789/0,ceph2=10.0.0.32:6789/0}
election epoch 482, quorum 0,2 ceph0,ceph2
osdmap e1628: 9 osds: 9 up, 7 in
pgmap v2187375: 768 pgs, 3 pools, 38075 MB data, 9129 objects
119 GB used, 6387 GB / 6506 GB avail
768 active+clean
HEALTH_WARN is because of 1 monitor down (broken node) and too many PGs per OSD
(329 > max 300), since I am removing OSDs
Now the problem I am facing: When I try to reweight the 3rd OSD to 0 the
cluster never comes to the active+clean state anymore.
# ceph --version
ceph version 0.94.5 (9764da52395923e0b32908d83a9f7304401fee43)
# ceph osd crush reweight osd.7 0.0
reweighted item id 7 name 'osd.7' to 0 in crush map
# ceph -s
cluster d1af2097-8535-42f2-ba8c-0667f90cab61
health HEALTH_WARN
768 pgs stuck unclean
recovery 817/27387 objects degraded (2.983%)
recovery 9129/27387 objects misplaced (33.333%)
1 mons down, quorum 0,2 ceph0,ceph2
monmap e1: 3 mons at
{ceph0=10.0.0.30:6789/0,ceph1=10.0.0.31:6789/0,ceph2=10.0.0.32:6789/0}
election epoch 482, quorum 0,2 ceph0,ceph2
osdmap e1682: 9 osds: 9 up, 7 in; 768 remapped pgs
pgmap v2187702: 768 pgs, 3 pools, 38076 MB data, 9129 objects
119 GB used, 6387 GB / 6506 GB avail
817/27387 objects degraded (2.983%)
9129/27387 objects misplaced (33.333%)
768 active+remapped
I also remarked I need to reweight to 0.7 to get in active+clean state again.
Any idea how to remove this last OSD that I can setup the node again ?
Thank you in advance, any help appreciated.
Daniel
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
