Hi there,
I setup ceph cluster with disable cephx cluster authen and enable cephx client
authen as follow :
auth_cluster_required = none
auth_service_required = cephx
auth_client_required = cephx
I can run command such as `ceph -s`, `rados -p rbd put` but I can not run
command `rbd ls`, `rbd create` ... Output of those commands always are:
2016-03-15 10:49:30.659194 7f1a6eda0700 0 cephx: verify_reply couldn't decrypt
with error: error decoding block for decryption
2016-03-15 10:49:30.659211 7f1a6eda0700 0 -- 172.30.6.101:0/954989888 >>
172.30.6.103:6804/23638 pipe(0x7f1a8119f7f0 sd=4 :45067 s=1 pgs=0 cs=0 l=1
c=0x7f1a81197000).failed verifying authorize reply
Can you explain me why RBD failed in this case ? Thank you in advance
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
