I must also add that I just found in the log the following. I don't know if
this has something to do with the problem.


=> ceph-osd.admin.log <==
2016-05-10 18:21:46.060278 7fa8f30cc8c0  0 ceph version 10.1.2
(4a2a6f72640d6b74a3bbd92798bb913ed380dcd4), process ceph-osd, pid 14135
2016-05-10 18:21:46.060460 7fa8f30cc8c0 -1 bluestore(/dev/sdc2)
_read_bdev_label unable to decode label at offset 66:
buffer::malformed_input: void
bluestore_bdev_label_t::decode(ceph::buffer::list::iterator&) decode past
end of struct encoding
2016-05-10 18:21:46.062949 7fa8f30cc8c0  1 journal _open /dev/sdc2 fd 4:
5367660544 bytes, block size 4096 bytes, directio = 0, aio = 0
2016-05-10 18:21:46.062991 7fa8f30cc8c0  1 journal close /dev/sdc2
2016-05-10 18:21:46.063026 7fa8f30cc8c0  0 probe_block_device_fsid
/dev/sdc2 is filestore, 119a9f4e-73d8-4a1f-877c-d60b01840c96
2016-05-10 18:21:47.072082 7eff735598c0  0 ceph version 10.1.2
(4a2a6f72640d6b74a3bbd92798bb913ed380dcd4), process ceph-osd, pid 14177
2016-05-10 18:21:47.072285 7eff735598c0 -1 bluestore(/dev/sdf2)
_read_bdev_label unable to decode label at offset 66:
buffer::malformed_input: void
bluestore_bdev_label_t::decode(ceph::buffer::list::iterator&) decode past
end of struct encoding
2016-05-10 18:21:47.074799 7eff735598c0  1 journal _open /dev/sdf2 fd 4:
5367660544 bytes, block size 4096 bytes, directio = 0, aio = 0
2016-05-10 18:21:47.074844 7eff735598c0  1 journal close /dev/sdf2
2016-05-10 18:21:47.074881 7eff735598c0  0 probe_block_device_fsid
/dev/sdf2 is filestore, fd069e6a-9a62-4286-99cb-d8a523bd946a
r

On Tue, May 10, 2016 at 6:07 PM, Gonzalo Aguilar Delgado <
[email protected]> wrote:

> Hello,
>
> I just upgraded my cluster to the version 10.1.2 and it worked well for a
> while until I saw that systemctl [email protected] was failed
> and I reruned it.
>
> From there the OSD stopped working.
>
> This is ubuntu 16.04.
>
> I connected to the IRC looking for help where people pointed me to one or
> another place but none of the investigations helped to resolve.
>
> My configuration is rather simple:
>
> oot@red-compute:~# ceph osd tree
> ID WEIGHT  TYPE NAME                 UP/DOWN REWEIGHT PRIMARY-AFFINITY
> -1 1.00000 root default
> -4 1.00000     rack rack-1
> -2 1.00000         host blue-compute
>  0 1.00000             osd.0            down        0          1.00000
>  2 1.00000             osd.2            down        0          1.00000
> -3 1.00000         host red-compute
>  1 1.00000             osd.1            down        0          1.00000
>  3 0.50000             osd.3              up  1.00000          1.00000
>  4 1.00000             osd.4            down        0          1.00000
>
>
>
> This is what I got sofar:
>
>
>    1. Once upgraded I discovered that daemon runs under ceph. I just ran
>    chown on ceph directories. and it worked.
>    2. Firewall is fully disabled. Checked connectivity with nc and nmap.
>    3. Configuration seems to be right. I can post if you want.
>    4. Enabling logging on OSD shows that for example osd.1 is
>    reconnecting all the time.
>       1. 2016-05-10 14:35:48.199573 7f53e8f1a700  1 -- 0.0.0.0:6806/13962
>       >> :/0 pipe(0x556f99413400 sd=84 :6806 s=0 pgs=0 cs=0 l=0
>       c=0x556f993b3a80).accept sd=84 172.16.0.119:35388/0
>        2016-05-10 14:35:48.199966 7f53e8f1a700  2 -- 0.0.0.0:6806/13962
>       >> :/0 pipe(0x556f99413400 sd=84 :6806 s=4 pgs=0 cs=0 l=0
>       c=0x556f993b3a80).fault (0) Success
>        2016-05-10 14:35:48.200018 7f53fb941700  1 osd.1 2468
>       ms_handle_reset con 0x556f993b3a80 session 0
>    5. OSD.3 goes ok because never left out because ceph restriction.
>    6. I rebooted all services at once for it to have available all OSD at
>    the same time and don't mark it down. Don't work.
>    7. I forced up from commandline. ceph osd in 1-5. They appear as in
>    for a while then out.
>    8. We tried ceph-disk activate-all to boot everything. Don't work.
>
>
> The strange thing is that culster started worked just right after upgrade.
> But the systemctrl command broke both servers.
>
> root@blue-compute:~# ceph -w
>     cluster 9028f4da-0d77-462b-be9b-dbdf7fa57771
>      health HEALTH_ERR
>             694 pgs are stuck inactive for more than 300 seconds
>             694 pgs stale
>             694 pgs stuck stale
>             too many PGs per OSD (1528 > max 300)
>             mds cluster is degraded
>             crush map has straw_calc_version=0
>      monmap e10: 2 mons at {blue-compute=
> 172.16.0.119:6789/0,red-compute=172.16.0.100:6789/0}
>             election epoch 3600, quorum 0,1 red-compute,blue-compute
>       fsmap e673: 1/1/1 up {0:0=blue-compute=up:replay}
>      osdmap e2495: 5 osds: 1 up, 1 in; 5 remapped pgs
>       pgmap v40765481: 764 pgs, 6 pools, 410 GB data, 103 kobjects
>             87641 MB used, 212 GB / 297 GB avail
>                  694 stale+active+clean
>                   70 active+clean
>
> 2016-05-10 17:03:55.822440 mon.0 [INF] HEALTH_ERR; 694 pgs are stuck
> inactive for more than 300 seconds; 694 pgs stale; 694 pgs stuck stale; too
> many PGs per OSD (1528 > max 300); mds cluster is degraded; crush map has
> straw_calc_version=
>
> cat /etc/ceph/ceph.conf
> [global]
>
> fsid = 9028f4da-0d77-462b-be9b-dbdf7fa57771
> mon_initial_members = blue-compute, red-compute
> mon_host = 172.16.0.119, 172.16.0.100
> auth_cluster_required = cephx
> auth_service_required = cephx
> auth_client_required = cephx
> filestore_xattr_use_omap = true
> public_network = 172.16.0.0/24
> osd_pool_default_pg_num = 100
> osd_pool_default_pgp_num = 100
> osd_pool_default_size = 2  # Write an object 3 times.
> osd_pool_default_min_size = 1 # Allow writing one copy in a degraded state.
>
> ## Required upgrade
> osd max object name len = 256
> osd max object namespace len = 64
>
> [mon.]
>
>     debug mon = 9
>     caps mon = "allow *"
>
>
> Any help on this? Any clue of what's going wrong?
>
>
> Best regards,
>
>
>


-- 
No subestimes el poder de la gente estúpida en grupos grandes...
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to