Hi all,
I have a cluster setup AIO with only one monitor and now I've created
another monitor in other server following this doc
http://docs.ceph.com/docs/master/rados/operations/add-or-rm-mons/ but my
problem is if I stop the AIO monitor, the cluster stop working. It seems
like the ceph is not updated with the new mon or something
Here I can see two monitors:
$ ceph -s
cluster 0817ef6e-233d-41cc-801c-cfb90ed9597a
health HEALTH_OK
monmap e2: 2 mons at {ceph-monitor-2=
192.168.1.10:6789/0,ceph-monitor=192.168.1.11:6789/0}
election epoch 40, quorum 0,1 ceph-monitor-2,ceph-monitor
osdmap e400: 4 osds: 4 up, 4 in
flags sortbitwise
pgmap v832123: 684 pgs, 7 pools, 291 GB data, 38993 objects
303 GB used, 3420 GB / 3724 GB avail
684 active+clean
But If I stop the ceph-monitor I can see this error:
2016-07-07 17:11:52.287879 7fc04c1fa700 0 -- 192.168.1.10:0/3737104056 >>
pipe(0x7fc03c000cc0 sd=3 :0 s=1 pgs=0 cs=0 l=1 c=0x7fc03c002000).fault
Any help?
Thanks,
Fran.
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
