Hi,
just an additional comment:
you can disable backfilling and recovery temporarily by setting the
'nobackfill' and 'norecover' flags. It will reduce the backfilling
traffic and may help the cluster and its OSD to recover. Afterwards you
should set the backfill traffic settings to the minimum (e.g.
max_backfills = 1) and unset the flags to allow the cluster to perform
the outstanding recovery operation.
As the others already pointed out, these actions might help to get the
cluster up and running again, but you need to find the actual reason for
the problems.
Regards,
Burkhard
On 19.10.2016 10:04, Christian Balzer wrote:
Hello,
no specific ideas, but this somewhat sounds familiar.
One thing first, you already stopped client traffic but to make sure your
cluster really becomes quiescent, stop all scrubs as well.
That's always a good idea in any recovery, overload situation.
Have you verified CPU load (are those OSD processes busy), memory status,
etc?
How busy are the actual disks?
Sudden deaths like this often are the results of network changes, like a
switch rebooting and loosing jumbo frame configuration or whatnot.
Christian
On Wed, 19 Oct 2016 09:44:01 +0200 Yoann Moulin wrote:
Dear List,
We have a cluster in Jewel 10.2.2 under ubuntu 16.04. The cluster is compose by
12 nodes, each nodes have 10 OSD with journal on disk.
We have one rbd partition and a radosGW with 2 data pool, one replicated, one
EC (8+2)
in attachment few details on our cluster.
Currently, our cluster is not usable at all due to too much OSD instability. OSDs daemon
die randomly with "hit suicide timeout". Yesterday, all
of 120 OSDs died at least 12 time (max 74 time) with an average around 40 time
here logs from ceph mon and from one OSD :
http://icwww.epfl.ch/~ymoulin/ceph/cephprod.log.bz2 (6MB)
http://icwww.epfl.ch/~ymoulin/ceph/cephprod-osd.10.log.bz2 (6MB)
We have stopped all clients i/o to see if the cluster get stable without
success, to avoid endless rebalancing with OSD flapping, we had to
"set noout" the cluster. For now we have no idea what's going on.
Anyone can help us to understand what's happening ?
thanks for your help
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
