HI All,
I try to configure multipath by export two iscsi gateway on two host
with same one rbd volume, The steps is below:
one host1:
1) mapped a rbd volume as a local blockdevice
rbd map fastpool/vdisk
as /dev/rbd0
2) export /dev/rbd0 as iscsi taget:
[root@zk23-03 ~]# targetcli / ls
o- /
.........................................................................................................................
[...]
o- backstores
..............................................................................................................
[...]
| o- block
..................................................................................................
[Storage Objects: 1]
| | o- fastpool_vdisk
................................................................
[/dev/rbd0 (195.3GiB) write-thru activated]
| o- fileio
.................................................................................................
[Storage Objects: 0]
| o- pscsi
..................................................................................................
[Storage Objects: 0]
| o- ramdisk
................................................................................................
[Storage Objects: 0]
o- iscsi
............................................................................................................
[Targets: 1]
| o- iqn.2016-05.com.zettakit.www:fastpool.vdisk
.......................................................................
[TPGs: 1]
| o- tpg1
...............................................................................................
[no-gen-acls, no-auth]
| o- acls
..........................................................................................................
[ACLs: 1]
| | o- iqn.2016-05.com.zettakit:node2202.local1
............................................................. [Mapped
LUNs: 1]
| | o- mapped_lun0
........................................................................
[lun0 block/fastpool_vdisk (rw)]
| o- luns
..........................................................................................................
[LUNs: 1]
| | o- lun0
...............................................................................
[block/fastpool_vdisk (/dev/rbd0)]
| o- portals
....................................................................................................
[Portals: 0]
o- loopback
.........................................................................................................
[Targets: 0]
o- srpt
.............................................................................................................
[Targets: 0]
one host2, do the same:
one host1:
1) mapped a rbd volume as a local blockdevice
rbd map fastpool/vdisk
as /dev/rbd0
2) export /dev/rbd0 as iscsi taget:
[root@zk23-01 ~]# targetcli / ls
o- /
.........................................................................................................................
[...]
o- backstores
..............................................................................................................
[...]
| o- block
..................................................................................................
[Storage Objects: 1]
| | o- fastpool_vdisk
................................................................
[/dev/rbd0 (195.3GiB) write-thru activated]
| o- fileio
.................................................................................................
[Storage Objects: 0]
| o- pscsi
..................................................................................................
[Storage Objects: 0]
| o- ramdisk
................................................................................................
[Storage Objects: 0]
o- iscsi
............................................................................................................
[Targets: 1]
| o- iqn.2016-05.com.zettakit.www:fastpool.vdisk
.......................................................................
[TPGs: 1]
| o- tpg1
...............................................................................................
[no-gen-acls, no-auth]
| o- acls
..........................................................................................................
[ACLs: 1]
| | o- iqn.2016-05.com.zettakit:node2202.local1
............................................................. [Mapped
LUNs: 1]
| | o- mapped_lun0
........................................................................
[lun0 block/fastpool_vdisk (rw)]
| o- luns
..........................................................................................................
[LUNs: 1]
| | o- lun0
...............................................................................
[block/fastpool_vdisk (/dev/rbd0)]
| o- portals
....................................................................................................
[Portals: 0]
o- loopback
.........................................................................................................
[Targets: 0]
o- srpt
.............................................................................................................
[Targets: 0]
After building connection to the two targets by iscsi-initiator, it
will have two iscsi dev: /dev/sdm and /dev/sdn,
but the multipath doesn't recognize it was same device.
By leaning multipath , I know it will use scsi_id to recognize as the
same device, how to use targetcli to export a rbd volume with the same
scsi_id ?
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
