On Oct 27, 2016 3:16 PM, "Oliver Dzombic" <[email protected]> wrote: > > Hi, > > i can recommand > > X710-DA2 > Weer also use this nice for everything.
> 10G Switch is going over our bladeinfrastructure, so i can't recommand > something for you there. > > I assume that the usual juniper/cisco will do a good job. I think, for > ceph, the switch is not the major point of a setup. > We use Edge-Core 5712-54x running Cumulus Linux. Anything off their compatibility list would be good though. The switch is 48 10G sfp+ ports. We just use copper cables with attached sfp. It also had 6 40G ports. The switch cost around $4800 and the cumulus license is about 3k for a perpetual license. > -- > Mit freundlichen Gruessen / Best regards > > Oliver Dzombic > IP-Interactive > > mailto:[email protected] > > Anschrift: > > IP Interactive UG ( haftungsbeschraenkt ) > Zum Sonnenberg 1-3 > 63571 Gelnhausen > > HRB 93402 beim Amtsgericht Hanau > Geschäftsführung: Oliver Dzombic > > Steuer Nr.: 35 236 3622 1 > UST ID: DE274086107 > > > Am 27.10.2016 um 15:04 schrieb Jelle de Jong: > > Hello everybody, > > > > I want to upgrade my small ceph cluster to 10Gbit networking and would > > like some recommendation from your experience. > > > > What is your recommend budget 10Gbit switch suitable for Ceph? > > > > I would like to use X550-T1 intel adapters in my nodes. > > > > Or is fibre recommended? > > X520-DA2 > > X520-SR1 > > > > Kind regards, > > > > Jelle de Jong > > GNU/Linux Consultant > > _______________________________________________ > > ceph-users mailing list > > [email protected] > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > _______________________________________________ > ceph-users mailing list > [email protected] > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com -Erik
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
