From: ceph-users [mailto:[email protected]] On Behalf Of Kent Borg Sent: 03 January 2017 12:47 To: M Ranga Swami Reddy <[email protected]> Cc: ceph-users <[email protected]> Subject: Re: [ceph-users] performance with/without dmcrypt OSD On 01/03/2017 06:42 AM, M Ranga Swami Reddy wrote: On Tue, Jan 3, 2017 at 6:17 AM, Kent Borg <[email protected] <mailto:[email protected]> > wrote: Assuming I am understanding the question... If there isn't too big a performance hit, it makes disk disposal (we expect disks to die, right?) much simpler. OK. Thanks. But if I have a big volumes in TB size (10 TB volume) and writing/reading from the big volumes - will impact on performance like write and read speed? I'd like to know, too. -kb Not specifically related to Ceph, but I built a 14 disk RAID 6 array (mdadm) for a recent "secure high performance seeding device in a briefcase" project and used dmcrypt on it. I could easily obtain over 1GB/s reads and writes. From tests there was no noticeable performance impact and CPU usage on a Xeon E3 was nothing to be concerned about. All modern CPU's will HW accelerate the process if you use the AES-XTS cipher, I suspect there might be a severe performance impact without. Also as Ceph+network itself brings a fair amount of overhead, I wouldn't suspect that dmcrypt would introduce any noticeable overhead of its own.
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
