Using ``ceph-deploy`` will save your life: # https://github.com/ceph/ceph/blob/master/doc/start/quick-ceph-deploy.rst * Please look at: Adding Monitors
If you are using centos or similar, the latest package is available here: # http://download.ceph.com/rpm-jewel/el7/noarch/ceph-deploy-1.5.37-0.noarch.rpm Regards, On Sun, Jan 8, 2017 at 9:53 AM, Alex Evonosky <[email protected]> wrote: > Thank you for the reply! > > I followed this article: > > http://docs.ceph.com/docs/jewel/rados/operations/add-or-rm-mons/ > > > Under the section: ADDING A MONITOR (MANUAL) > > > > Alex F. Evonosky > > <https://twitter.com/alexevon> <https://www.linkedin.com/in/alexevonosky> > > On Sat, Jan 7, 2017 at 6:36 PM, Shinobu Kinjo <[email protected]> wrote: > >> How did you add a third MON? >> >> Regards, >> >> On Sun, Jan 8, 2017 at 7:01 AM, Alex Evonosky <[email protected]> >> wrote: >> > Anyone see this before? >> > >> > >> > 2017-01-07 16:55:11.406047 7f095b379700 0 cephx: verify_reply couldn't >> > decrypt with error: error decoding block for decryption >> > 2017-01-07 16:55:11.406053 7f095b379700 0 -- 10.10.10.138:6789/0 >> >> > 10.10.10.252:6789/0 pipe(0x55cf8d028000 sd=11 :47548 s=1 pgs=0 cs=0 l=0 >> > c=0x55cf8ce28f00).failed verifying authorize reply >> > >> > >> > >> > Two monitors are up just fine, just trying to add a third and a quorum >> > cannot be met. NTP is running and no iptables running at all on >> internal >> > cluster. >> > >> > >> > Thank you. >> > -Alex >> > >> > >> > >> > >> > _______________________________________________ >> > ceph-users mailing list >> > [email protected] >> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> > >> > >
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
