Thanks Cary!
Your directions worked on my first sever. (once I found the missing carriage
return in your list of commands, the email musta messed it up.
For anyone else:
chown -R ceph:ceph /var/lib/ceph/osd/ceph-4 ceph auth add osd.4 osd
'allow *' mon 'allow profile osd' -i /etc/ceph/ceph.osd.4.keyring really is 2
commands:
chown -R ceph:ceph /var/lib/ceph/osd/ceph-4 and ceph auth add osd.4
osd 'allow *' mon 'allow profile osd' -i /etc/ceph/ceph.osd.4.keyring
Cary, what am I looking for in ceph -w and ceph -s to show the status of the
data moving?
Seems like the data is moving and that I have some issue...
root@node-53:~# ceph -w
cluster 2b9f7957-d0db-481e-923e-89972f6c594f
health HEALTH_WARN
176 pgs backfill_wait
1 pgs backfilling
27 pgs degraded
1 pgs recovering
26 pgs recovery_wait
27 pgs stuck degraded
204 pgs stuck unclean
recovery 10322/84644 objects degraded (12.195%)
recovery 52912/84644 objects misplaced (62.511%)
monmap e3: 3 mons at
{node-43=192.168.1.7:6789/0,node-44=192.168.1.5:6789/0,node-45=192.168.1.3:6789/0}
election epoch 138, quorum 0,1,2 node-45,node-44,node-43
osdmap e206: 4 osds: 4 up, 4 in; 177 remapped pgs
flags sortbitwise,require_jewel_osds
pgmap v3936175: 512 pgs, 5 pools, 333 GB data, 58184 objects
370 GB used, 5862 GB / 6233 GB avail
10322/84644 objects degraded (12.195%)
52912/84644 objects misplaced (62.511%)
308 active+clean
176 active+remapped+wait_backfill
26 active+recovery_wait+degraded
1 active+remapped+backfilling
1 active+recovering+degraded recovery io 100605
kB/s, 14 objects/s
client io 0 B/s rd, 92788 B/s wr, 50 op/s rd, 11 op/s wr
2017-12-14 22:45:57.459846 mon.0 [INF] pgmap v3936174: 512 pgs: 1
activating, 1 active+recovering+degraded, 26
active+recovery_wait+degraded, 1 active+remapped+backfilling, 307
active+clean, 176 active+remapped+wait_backfill; 333 GB data, 369 GB
used, 5863 GB / 6233 GB avail; 0 B/s rd, 101107 B/s wr, 19 op/s;
10354/84644 objects degraded (12.232%); 52912/84644 objects misplaced
(62.511%); 12224 kB/s, 2 objects/s recovering
2017-12-14 22:45:58.466736 mon.0 [INF] pgmap v3936175: 512 pgs: 1
active+recovering+degraded, 26 active+recovery_wait+degraded, 1
active+remapped+backfilling, 308 active+clean, 176 wait_backfill; 333
active+remapped+GB data, 370 GB used, 5862 GB /
6233 GB avail; 0 B/s rd, 92788 B/s wr, 61 op/s; 10322/84644 objects
degraded (12.195%); 52912/84644 objects misplaced (62.511%); 100605
kB/s, 14 objects/s recovering
2017-12-14 22:46:00.474335 mon.0 [INF] pgmap v3936176: 512 pgs: 1
active+recovering+degraded, 26 active+recovery_wait+degraded, 1
active+remapped+backfilling, 308 active+clean, 176 wait_backfill; 333
active+remapped+GB data, 370 GB used, 5862 GB /
6233 GB avail; 0 B/s rd, 434 kB/s wr, 45 op/s; 10322/84644 objects
degraded (12.195%); 52912/84644 objects misplaced (62.511%); 84234
kB/s, 10 objects/s recovering
2017-12-14 22:46:02.482228 mon.0 [INF] pgmap v3936177: 512 pgs: 1
active+recovering+degraded, 26 active+recovery_wait+degraded, 1
active+remapped+backfilling, 308 active+clean, 176 wait_backfill; 333
active+remapped+GB data, 370 GB used, 5862 GB /
6233 GB avail; 0 B/s rd, 334 kB/s wr
-----Original Message-----
From: Cary [mailto:dynamic.c...@gmail.com]
Sent: Thursday, December 14, 2017 4:21 PM
To: James Okken
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] add hard drives to 3 CEPH servers (3 server
cluster)
Jim,
I am not an expert, but I believe I can assist.
Normally you will only have 1 OSD per drive. I have heard discussions about
using multiple OSDs per disk, when using SSDs though.
Once your drives have been installed you will have to format them, unless you
are using Bluestore. My steps for formatting are below.
Replace the sXX with your drive name.
parted -a optimal /dev/sXX
print
mklabel gpt
unit mib
mkpart OSD4sdd1 1 -1
quit
mkfs.xfs -f /dev/sXX1
# Run blkid, and copy the UUID for the newly formatted drive.
blkid
# Add the mount point/UUID to fstab. The mount point will be created later.
vi /etc/fstab
# For example
UUID=6386bac4-7fef-3cd2-7d64-13db51d83b12 /var/lib/ceph/osd/ceph-4
xfs
rw,noatime,inode64,logbufs=8 0 0
# You can then add the OSD to the cluster.
uuidgen
# Replace the UUID below with the UUID that was created with uuidgen.
ceph osd create 23e734d7-96d8-4327-a2b9-0fbdc72ed8f1
# Notice what number of osd it creates usually the lowest # OSD available.
# Add osd.4 to ceph.conf on all Ceph nodes.
vi /etc/ceph/ceph.conf
...
[osd.4]
public addr = 172.1.3.1
cluster addr = 10.1.3.1
...
# Now add the mount point.
mkdir -p /var/lib/ceph/osd/ceph-4
chown -R ceph:ceph /var/lib/ceph/osd/ceph-4
# The command below mounts everything in fstab.
mount -a
# The number after -i below needs changed to the correct OSD ID, and the
osd-uuid needs to be changed the UUID created with uuidgen above.
Your keyring location may be different and need changed as well.
ceph-osd -i 4 --mkfs --mkkey --osd-uuid
23e734d7-96d8-4327-a2b9-0fbdc72ed8f1
chown -R ceph:ceph /var/lib/ceph/osd/ceph-4 ceph auth add osd.4 osd
'allow *' mon 'allow profile osd' -i /etc/ceph/ceph.osd.4.keyring
# Add the new OSD to its host in the crush map.
ceph osd crush add osd.4 .0 host=YOURhostNAME
# Since the weight used in the previous step was .0, you will need to increase
it. I use 1 for a 1TB drive and 5 for a 5TB drive. The command below will
reweight osd.4 to 1. You may need to slowly ramp up this number. ie .10 then
.20 etc.
ceph osd crush reweight osd.4 1
You should now be able to start the drive. You can watch the data move to the
drive with a ceph -w. Once data has migrated to the drive, start the next.
Cary
-Dynamic
On Thu, Dec 14, 2017 at 5:34 PM, James Okken <james.ok...@dialogic.com> wrote:
Hi all,
Please let me know if I am missing steps or using the wrong steps
I'm hoping to expand my small CEPH cluster by adding 4TB hard drives to each of
the 3 servers in the cluster.
I also need to change my replication factor from 1 to 3.
This is part of an Openstack environment deployed by Fuel and I had foolishly
set my replication factor to 1 in the Fuel settings before deploy. I know this
would have been done better at the beginning. I do want to keep the current
cluster and not start over. I know this is going thrash my cluster for a while
replicating, but there isn't too much data on it yet.
To start I need to safely turn off each CEPH server and add in the 4TB drive:
To do that I am going to run:
ceph osd set noout
systemctl stop ceph-osd@1 (or 2 or 3 on the other servers) ceph osd
tree (to verify it is down) poweroff, install the 4TB drive, bootup
again ceph osd unset noout
Next step wouyld be to get CEPH to use the 4TB drives. Each CEPH server already
has a 836GB OSD.
ceph> osd df
ID WEIGHT REWEIGHT SIZE USE AVAIL %USE VAR PGS
0 0.81689 1.00000 836G 101G 734G 12.16 0.90 167
1 0.81689 1.00000 836G 115G 721G 13.76 1.02 166
2 0.81689 1.00000 836G 121G 715G 14.49 1.08 179
TOTAL 2509G 338G 2171G 13.47 MIN/MAX VAR: 0.90/1.08
STDDEV: 0.97
ceph> df
GLOBAL:
SIZE AVAIL RAW USED %RAW USED
2509G 2171G 338G 13.47
POOLS:
NAME ID USED %USED MAX AVAIL OBJECTS
rbd 0 0 0 2145G 0
images 1 216G 9.15 2145G 27745
backups 2 0 0 2145G 0
volumes 3 114G 5.07 2145G 29717
compute 4 0 0 2145G 0
Once I get the 4TB drive into each CEPH server should I look to increasing the
current OSD (ie: to 4836GB)?
Or create a second 4000GB OSD on each CEPH server?
If I am going to create a second OSD on each CEPH server I hope to use this doc:
http://docs.ceph.com/docs/master/rados/operations/add-or-rm-osds/
As far as changing the replication factor from 1 to 3:
Here are my pools now:
ceph osd pool ls detail
pool 0 'rbd' replicated size 1 min_size 1 crush_ruleset 0
object_hash rjenkins pg_num 64 pgp_num 64 last_change 1 flags hashpspool
stripe_width 0 pool 1 'images' replicated size 1 min_size 1 crush_ruleset 0
object_hash rjenkins pg_num 64 pgp_num 64 last_change 116 flags hashpspool
stripe_width 0
removed_snaps [1~3,b~6,12~8,20~2,24~6,2b~8,34~2,37~20]
pool 2 'backups' replicated size 1 min_size 1 crush_ruleset 0
object_hash rjenkins pg_num 64 pgp_num 64 last_change 7 flags hashpspool
stripe_width 0 pool 3 'volumes' replicated size 1 min_size 1 crush_ruleset 0
object_hash rjenkins pg_num 256 pgp_num 256 last_change 73 flags hashpspool
stripe_width 0
removed_snaps [1~3]
pool 4 'compute' replicated size 1 min_size 1 crush_ruleset 0
object_hash rjenkins pg_num 64 pgp_num 64 last_change 34 flags
hashpspool stripe_width 0
I plan on using these steps I saw online:
ceph osd pool set rbd size 3
ceph -s (Verify that replication completes successfully) ceph osd
pool set images size 3 ceph -s ceph osd pool set backups size 3 ceph
-s ceph osd pool set volumes size 3 ceph -s
please let me know any advice or better methods...
thanks
--Jim
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
