Answer is in the logs: [mon01][WARNIN] To connect to download.ceph.com insecurely, use `--no-check-certificate'.
It will be better to mirror the repos and use them offline... On Fri, Jan 5, 2018 at 12:08 PM, Hüseyin Atatür YILDIRIM < [email protected]> wrote: > I’ve upgraded the ceph-deploy, and I used the command: > > > > ceph-deploy install --release luminous mon01 osd01 osd02 > > > > but this time it gives certificate errors. I’m behind the corporate Proxy: > > > > > > [mon01][DEBUG ] connection detected need for sudo > > [mon01][DEBUG ] connected to host: mon01 > > [mon01][DEBUG ] detect platform information from remote host > > [mon01][DEBUG ] detect machine type > > [ceph_deploy.install][INFO ] Distro info: Ubuntu 16.04 xenial > > [mon01][INFO ] installing Ceph on mon01 > > [mon01][INFO ] Running command: sudo env DEBIAN_FRONTEND=noninteractive > DEBIAN_PRIORITY=critical apt-get --assume-yes -q --no-install-recommends > install ca-certificates apt-transport-https > > [mon01][DEBUG ] Reading package lists... > > [mon01][DEBUG ] Building dependency tree... > > [mon01][DEBUG ] Reading state information... > > [mon01][DEBUG ] apt-transport-https is already the newest version (1.2.24). > > [mon01][DEBUG ] ca-certificates is already the newest version > (20170717~16.04.1). > > [mon01][DEBUG ] 0 upgraded, 0 newly installed, 0 to remove and 4 not > upgraded. > > [mon01][INFO ] Running command: sudo wget -O release.asc > https://download.ceph.com/keys/release.asc > > [mon01][WARNIN] --2018-01-05 12:00:33-- https://download.ceph.com/ > keys/release.asc > > [mon01][WARNIN] Resolving download.ceph.com (download.ceph.com)... > 158.69.68.124, 2607:5300:201:2000::3:58a1 > > [mon01][WARNIN] Connecting to download.ceph.com (download.ceph.com > )|158.69.68.124|:443... connected. > > [mon01][WARNIN] ERROR: cannot verify download.ceph.com's certificate, > issued by ‘CN=swcgint1.hvlnet.net’: > > [mon01][WARNIN] Self-signed certificate encountered. > > [mon01][WARNIN] To connect to download.ceph.com insecurely, use > `--no-check-certificate'. > > [mon01][WARNIN] command returned non-zero exit status: 5 > > [mon01][INFO ] Running command: sudo apt-key add release.asc > > [mon01][WARNIN] gpg: no valid OpenPGP data found. > > [mon01][ERROR ] RuntimeError: command returned non-zero exit status: 2 > > [ceph_deploy][ERROR ] RuntimeError: Failed to execute command: apt-key add > release.asc > > > > Is it possible to overcome this or do I need to use the manual > installation? I’m using Ubuntu 16.04. > > > > Thank you, > > Atatür > > > > *From:* Sergey Malinin [mailto:[email protected]] > *Sent:* Friday, January 5, 2018 11:56 AM > > *To:* Hüseyin Atatür YILDIRIM <[email protected]>; > [email protected] > *Subject:* Re: [ceph-users] "ceph -s" shows no osds > > > > 1.5.39 can be installed from “luminous” repo:: > > > > http://docs.ceph.com/docs/master/install/get-packages/ > > > ------------------------------ > > *From:* Hüseyin Atatür YILDIRIM <[email protected]> > *Sent:* Friday, January 5, 2018 9:16:48 AM > *To:* Sergey Malinin; [email protected] > *Subject:* RE: [ceph-users] "ceph -s" shows no osds > > > > Thanks a lot Sergey. I searched about the upgrade of ceph-deploy and found > out “pip install” is the most reasonable one; normal software repo > install (i.e. sudo apt install ceph-deploy) always installs version 1.32. > > Do you agree with this ? > > > > Regards, > > Atatür > > *From:* Sergey Malinin [mailto:[email protected] <[email protected]>] > *Sent:* Thursday, January 4, 2018 3:46 PM > *To:* Hüseyin Atatür YILDIRIM <[email protected]>; > [email protected] > *Subject:* Re: [ceph-users] "ceph -s" shows no osds > > > > Mgr installation was introduced in 1.5.38, you need to upgrade ceph-deploy. > > > ------------------------------ > > *From:* Hüseyin Atatür YILDIRIM <[email protected]> > *Sent:* Thursday, January 4, 2018 2:01:57 PM > *To:* Sergey Malinin; [email protected] > *Subject:* RE: [ceph-users] "ceph -s" shows no osds > > > > Hi, > > > > > > ceph-deploy --version > > 1.5.32 > > > > Thank you, > > Atatür > > *From:* Sergey Malinin [mailto:[email protected] <[email protected]>] > *Sent:* Thursday, January 4, 2018 12:51 PM > *To:* Hüseyin Atatür YILDIRIM <[email protected]>; > [email protected] > *Subject:* Re: [ceph-users] "ceph -s" shows no osds > > > > What is you “ceph-deploy --version” ? > > > ------------------------------ > > *From:* Hüseyin Atatür YILDIRIM <[email protected]> > *Sent:* Thursday, January 4, 2018 9:14:39 AM > *To:* Sergey Malinin; [email protected] > *Subject:* RE: [ceph-users] "ceph -s" shows no osds > > > > Hello Sergey, > > > > I issued the mgr create command and it fails with > > > > ceph-deploy mgr create mon01 > > usage: ceph-deploy [-h] [-v | -q] [--version] [--username USERNAME] > > [--overwrite-conf] [--cluster NAME] [--ceph-conf > CEPH_CONF] > > COMMAND ... > > ceph-deploy: error: argument COMMAND: invalid choice: 'mgr' (choose from > 'new', 'install', 'rgw', 'mon', 'mds', 'gatherkeys', 'disk', 'osd', > 'admin', 'repo', 'config', 'uninstall', 'purge', 'purgedata', 'calamari', > 'forgetkeys', 'pkg') > > > > Any ideas? > > > > Thank you.. > > > > *From:* Sergey Malinin [mailto:[email protected] <[email protected]>] > *Sent:* Wednesday, January 3, 2018 5:56 PM > *To:* Hüseyin Atatür YILDIRIM <[email protected]>; > [email protected] > *Subject:* Re: [ceph-users] "ceph -s" shows no osds > > > > What version are you using? Luminous needs mgr daemons running. > > > ------------------------------ > > *From:* ceph-users <[email protected]> on behalf of > Hüseyin Atatür YILDIRIM <[email protected]> > *Sent:* Wednesday, January 3, 2018 5:15:30 PM > *To:* [email protected] > *Subject:* [ceph-users] "ceph -s" shows no osds > > > > > > Hello, > > > > I try to setup Ceph cluster on Ubuntu 16.04. I’ve setup 1 monitor-osd > (hostname mon01) and 2 osd hosts (osd01 and osd02). At one stage, I issued > > > > ceph-deploy osd create mon01:sdb1 osd01:sdb1 osd02:sdb1 > > > > and ran successfully. But when I issued below from the admin host: > > > > ssh mon01 sudo ceph –s > > > > cluster 9c7303db-56ab-4ddf-9fb8-1882754a4411 > > health HEALTH_ERR > > 64 pgs are stuck inactive for more than 300 seconds > > 64 pgs stuck inactive > > 64 pgs stuck unclean > > no osds > > monmap e1: 1 mons at {mon01=192.168.122.158:6789/0} > > election epoch 4, quorum 0 mon01 > > osdmap e1: 0 osds: 0 up, 0 in > > flags sortbitwise,require_jewel_osds > > pgmap v2: 64 pgs, 1 pools, 0 bytes data, 0 objects > > 0 kB used, 0 kB / 0 kB avail > > 64 creating > > > > > > There’s no osds in the cluster. Can you please help? > > > > Regards, > > Atatur > > > > <http://www.havelsan.com.tr> > > Hüseyin Atatür YILDIRIM > SİSTEM MÜHENDİSİ > > Üniversiteler Mah. İhsan Doğramacı Bul. ODTÜ Teknokent Havelsan A.Ş. 23/B > Çankaya Ankara TÜRKİYE > > +90 312 292 74 00 <+90%20312%20292%2074%2000> > > +90 312 219 57 97 <+90%20312%20219%2057%2097> > > YASAL UYARI: Bu elektronik posta işbu linki kullanarak ulaşabileceğiniz > Koşul ve Şartlar dokümanına tabidir. > <http://www.havelsan.com.tr/TR/Main/icerik/4513/mail-yasal-uyari> > > LEGAL NOTICE: This e-mail is subject to the Terms and Conditions > document which can be accessed with this link. > <http://www.havelsan.com.tr/TR/Main/icerik/4513/mail-yasal-uyari> > > Lütfen gerekmedikçe bu sayfa ve eklerini yazdırmayınız / Please consider > the environment before printing this email > > > > _______________________________________________ > ceph-users mailing list > [email protected] > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
