Peter; I was just looking at this myself. With regards to BlueStore, the Config Reference is useful: http://docs.ceph.com/docs/master/rados/configuration/bluestore-config-ref/
As far as tiering goes, the OSD Config Reference talks about it: http://docs.ceph.com/docs/master/rados/configuration/osd-config-ref/ The following talks extensively about tiering, and recommends not doing it: http://docs.ceph.com/docs/master/rados/operations/cache-tiering/ Thank you, Dominic L. Hilsbos, MBA Director - Information Technology Perform Air International Inc. -----Original Message----- From: ceph-users [mailto:[email protected]] On Behalf Of Jan Peters Sent: Thursday, February 15, 2018 11:45 AM To: [email protected] Subject: [ceph-users] Bluestore Hardwaresetup Hi everybody, I want to evaluate ceph with bluestore, so I need some hardware/configure advices from you. My Setup should be: 3 Nodes Cluster, on each with: - Intel Gold Processor SP 5118, 12 core / 2.30Ghz - 64GB RAM - 6 x 7,2k, 4 TB SAS - 2 x SSDs, 480GB On the POSIX FS you have to set your journal on SSDs. What is the best way for bluestore? Should I configure separate SSDs for block.db and block.wal? Is there a way to use CacheTiering or a cachepool? Thanks in advance Peter _______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
