Hi, blocked requests are just requests that took longer than 30 seconds to complete, this just means your cluster is completely overloaded by the benchmark. Also, OSD 2 might be slower than your other OSDs.
Paul 2018-04-30 15:36 GMT+02:00 Shantur Rathore <shantur.rath...@gmail.com>: > Hi all, > > I am trying to get my first test Ceph cluster working. > > Centos 7 with Elrepo 4.16.3-1.el7.elrepo.x86_64 kernel ( for iSCSI HA ) > Configured using - ceph-ansible > 3 Mons ( including 2 OSD nodes ) > 2 OSD nodes > 20 OSDs ( 10 per node ) > > Each OSD node has 256GB of memory and 2x10GBe Bonded interface. > For simplicity it uses public network only. > > During testing of the cluster from one of the OSD nodes whenever I do > a test i see slow / blocked requests on both nodes which clear up > after some time. > > I have checked the disks and network and both are working as expected. > I am trying to read and find ways to see what could be the issue but > unable to find any fix or solution to the problem. > > #Test Command > [root@storage-29 ~]# rbd bench --io-type write -p test --image disk1 > --io-pattern seq --io-size 4K --io-total 10G > > In this run i saw in "ceph health detail" that osd.2 has blocked > requests. So i ran > > [root@storage-29 ~]# ceph daemon osd.2 dump_blocked_ops > .. Last op from the output > > { > "description": "osd_op(client.181675.0:933 6.e1 > 6:8736f1d3:::rbd_data.20d9674b0dc51.00000000000006b7:head [write > 1150976~4096] snapc 0=[] ondisk+write+known_if_redirected e434)", > "initiated_at": "2018-04-30 14:04:37.656717", > "age": 79.228713, > "duration": 79.230355, > "type_data": { > "flag_point": "waiting for sub ops", > "client_info": { > "client": "client.181675", > "client_addr": "10.187.21.212:0/342865484", > "tid": 933 > }, > "events": [ > { > "time": "2018-04-30 14:04:37.656717", > "event": "initiated" > }, > { > "time": "2018-04-30 14:04:37.656789", > "event": "queued_for_pg" > }, > { > "time": "2018-04-30 14:04:37.656869", > "event": "reached_pg" > }, > { > "time": "2018-04-30 14:04:37.656917", > "event": "started" > }, > { > "time": "2018-04-30 14:04:37.656970", > "event": "waiting for subops from 10" > }, > { > "time": "2018-04-30 14:04:37.669473", > "event": "op_commit" > }, > { > "time": "2018-04-30 14:04:37.669475", > "event": "op_applied" > } > ] > } > } > > I checked the logs from > > [root@storage-30 ~]# tail -n 1000 /var/log/ceph/ceph-osd.10.log > > And around that time nothing is printed in logs > > 2018-04-30 13:34:59.986731 7fa91d3c5700 0 -- > 10.187.21.211:6810/343380 >> 10.187.21.211:6818/344034 > conn(0x55b79db85000 :6810 s=STATE_ACCEPTING_WAIT_CONNECT_MSG_AUTH > pgs=0 cs=0 l=0).handle_connect_msg accept connect_seq 56 vs existing > csq=55 existing_state=STATE_STANDBY > 2018-04-30 13:35:00.992309 7fa91d3c5700 0 -- > 10.187.21.211:6810/343380 >> 10.187.21.212:6825/94560 > conn(0x55b79e3fd000 :6810 s=STATE_ACCEPTING_WAIT_CONNECT_MSG_AUTH > pgs=0 cs=0 l=0).handle_connect_msg accept connect_seq 9 vs existing > csq=9 existing_state=STATE_STANDBY > 2018-04-30 13:35:00.992711 7fa91d3c5700 0 -- > 10.187.21.211:6810/343380 >> 10.187.21.212:6825/94560 > conn(0x55b79e3fd000 :6810 s=STATE_ACCEPTING_WAIT_CONNECT_MSG_AUTH > pgs=0 cs=0 l=0).handle_connect_msg accept connect_seq 10 vs existing > csq=9 existing_state=STATE_STANDBY > 2018-04-30 13:35:01.328882 7fa91d3c5700 0 -- > 10.187.21.211:6810/343380 >> 10.187.21.212:6821/94497 > conn(0x55b79e288000 :6810 s=STATE_ACCEPTING_WAIT_CONNECT_MSG_AUTH > pgs=0 cs=0 l=0).handle_connect_msg accept connect_seq 7 vs existing > csq=7 existing_state=STATE_STANDBY > 2018-04-30 13:35:01.329066 7fa91d3c5700 0 -- > 10.187.21.211:6810/343380 >> 10.187.21.212:6821/94497 > conn(0x55b79e288000 :6810 s=STATE_ACCEPTING_WAIT_CONNECT_MSG_AUTH > pgs=0 cs=0 l=0).handle_connect_msg accept connect_seq 8 vs existing > csq=7 existing_state=STATE_STANDBY > 2018-04-30 14:16:30.622506 7fa906bdc700 0 log_channel(cluster) log > [DBG] : 6.396 scrub starts > 2018-04-30 14:16:30.640450 7fa906bdc700 0 log_channel(cluster) log > [DBG] : 6.396 scrub ok > 2018-04-30 14:19:32.000798 7fa91d3c5700 0 -- > 10.187.21.211:6810/343380 >> 10.187.21.212:6801/93293 > conn(0x55b79e106000 :6810 s=STATE_ACCEPTING_WAIT_CONNECT_MSG_AUTH > pgs=0 cs=0 l=0).handle_connect_msg accept connect_seq 10 vs existing > csq=9 existing_state=STATE_OPEN > 2018-04-30 14:19:32.030075 7fa91d3c5700 0 -- > 10.187.21.211:6810/343380 >> 10.187.21.212:6825/94560 > conn(0x55b7a120b800 :-1 s=STATE_OPEN pgs=157 cs=11 l=0).fault > initiating reconnect > 2018-04-30 14:19:58.492777 7fa91c3c3700 0 -- > 10.187.21.211:6810/343380 >> 10.187.21.212:6829/94852 > conn(0x55b79e4a1000 :-1 s=STATE_OPEN pgs=153 cs=9 l=0).fault > initiating reconnect > 2018-04-30 14:19:59.265081 7fa91c3c3700 0 -- > 10.187.21.211:6810/343380 >> 10.187.21.211:6838/345694 > conn(0x55b79dba1000 :6810 s=STATE_ACCEPTING_WAIT_CONNECT_MSG_AUTH > pgs=0 cs=0 l=0).handle_connect_msg accept connect_seq 67 vs existing > csq=67 existing_state=STATE_STANDBY > > > I am not sure what I am missing? > - Maybe the request packet got lost > - Maybe i haven't enabled proper logging for osds > > Please suggest me how can i go about this problem? > > Regards, > Shantur > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > -- -- Paul Emmerich Looking for help with your Ceph cluster? Contact us at https://croit.io croit GmbH Freseniusstr. 31h 81247 München www.croit.io Tel: +49 89 1896585 90
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com