Hi everyone,
I've got a 3-node cluster running without any issue. However, I found out that
since upgraded to luminous, the client io stat is far too way off from the real
one. Have no idea how to troubleshoot this after went through all the logs. Any
help would be appreciated.
Got more than 10 client hosts connecting to the cluster, running around 300 VMs.
ceph version 12.2.4
#ceph -s
cluster:
id: xxxxxxxxxxxxxxx
health: HEALTH_OK
services:
mon: 3 daemons, quorum ceph0,ceph1,ceph2
mgr: ceph1(active), standbys: ceph0, ceph2
osd: 24 osds: 24 up, 24 in
rgw: 1 daemon active
data:
pools: 17 pools, 956 pgs
objects: 4225k objects, 14495 GB
usage: 43424 GB used, 16231 GB / 59656 GB avail
pgs: 956 active+clean
io:
client: 123 kB/s rd, 2677 kB/s wr, 38 op/s rd, 278 op/s wr
(at one of the node)
#atop
DSK | sdb | busy 42% | read 268 | write 519 | KiB/w 109
| MBr/s 2.4 | MBw/s 5.6 | avio 5.26 ms |
DSK | sde | busy 26% | read 129 | write 313 | KiB/w 150
| MBr/s 0.7 | MBw/s 4.6 | avio 5.94 ms |
DSK | sdg | busy 24% | read 90 | write 230 | KiB/w 86
| MBr/s 0.5 | MBw/s 1.9 | avio 7.50 ms |
DSK | sdf | busy 21% | read 109 | write 148 | KiB/w 162
| MBr/s 0.8 | MBw/s 2.3 | avio 8.12 ms |
DSK | sdh | busy 19% | read 100 | write 221 | KiB/w 118
| MBr/s 0.5 | MBw/s 2.5 | avio 5.78 ms |
DSK | sda | busy 18% | read 170 | write 163 | KiB/w 83
| MBr/s 1.6 | MBw/s 1.3 | avio 5.35 ms |
DSK | sdc | busy 3% | read 0 | write 1545 | KiB/w 58
| MBr/s 0.0 | MBw/s 8.8 | avio 0.21 ms |
DSK | sdd | busy 3% | read 0 | write 1195 | KiB/w 57
| MBr/s 0.0 | MBw/s 6.7 | avio 0.24 ms |
Regards,
Horace Ng
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
