I solved by myself.
I' writing here my findings to save some working hours to others.
Sound strange that nobody knew this.
The issue is that data is purged but LVM partition are leaved in place.
This means that you need to manually remove.
I just reinstalled the whole OS and on the data disks there are still
LVM partition named "ceph-*". These partition are ACTIVE by default.
To get rid of the old data:
#find disks
lsblk
See in the result all the "ceph-*" volume groups and remove theme:
vgchange -a n ceph-XXXXXXXXXXXXXXXXXX
vgremove ceph-XXXXXXXXXXXXXXXXXXX
Do it for all disks.
Now you can run *ceph-deploy osd create* correctly without being
prompted that disk is in use.
Il 06/06/2018 19:41, Max Cuttins ha scritto:
Hi everybody,
I would like to start from zero.
However last time I run the command to purge everything I got an issue.
I had a complete cleaned up system as expected, but disk was still OSD
and the new installation refused to overwrite disk in use.
The only way to make it work was manually format the disks with fdisk
and zap again with ceph later.
Is there something I shoulded do before purge everything in order to
do not have similar issue?
Thanks,
Max
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
