On Fri, Jan 18, 2019 at 12:53 AM kefu chai <[email protected]> wrote: > > On Tue, Jan 15, 2019 at 4:42 AM Yanko Davila <[email protected]> wrote: > > > > Hello > > > > I was able to find the device selector. Now I have an issue understanding > > the steps to activate the osd. Once I setup spdk the device disappears from > > lsblk as expected. So the ceph manual is not very helpful after spdk is > > enabled. Is there any manual that walks you through the steps to add an > > spdk nvme to ceph ?? Thanks again for your time. > > Yanko, please note, we use different ways to designate NVMe devices in > master (nautilus) and pre-nautilus . if you are using nautilus, sorry, should be "if you are using luminous or mimic"
> probably you could take a look at > https://github.com/tone-zhang/ceph/blob/71639aee00004d40f16d5cdb9abb6f241db206d2/src/vstart.sh > , search "spdk" for related setting and steps, and > https://github.com/tone-zhang/ceph/blob/78012eed1bf125ec37afa7605fa64cc798036e18/doc/rados/configuration/bluestore-config-ref.rst > for steps. > > as these changes were merged after we branch luminous and mimic, so > they are not in either of these branches. and since we are using the > PCI selector in master, the vstart.sh script and document were updated > accordingly. that's why you need to consult an older version of them. > > please note, the SPDK backed bluestore is not tested in our release > cycles like the filestore and aio backed bluestore are, so it's not > that well supported. > > > > > Yanko._______________________________________________ > > ceph-users mailing list > > [email protected] > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > -- > Regards > Kefu Chai -- Regards Kefu Chai _______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
