I don’t have an answer for you, but it’s going to help others to have shown:
Versions of all nodes involved and multi-master configuration
Confirm forward and reverse DNS and SSH / remote sudo since you are using deploy
Specific steps that did not behave properly
> On Jun 17, 2019, at 6:29 AM, CUZA Frédéric <[email protected]> wrote:
> 
> I’ll keep updating this until I find a solution so if anyone faces the same 
> problem he might have solution.
>  
> Atm : I install the new osd node with ceph-deploy and nothing change, node is 
> still not present in the cluster nor in the crushmap.
> I decided to manually add it to the crush map :
> ceph osd crush add-bucket sd0051 host
> and move it to where it should be :
> ceph osd crush move sd0051 room=roomA
> Then I added an osd to that node :
> ceph-deploy osd create sd0051 --data /dev/sde --block-db /dev/sda1 
> --block-wal /dev/sdb1 –bluestore
> Once finally created the osd is still not linked to the host where it is 
> created and I can’t move it the this host right now;
>  
>  
> Regards,
>  
>  
> De : ceph-users <[email protected]> De la part de CUZA 
> Frédéric
> Envoyé : 15 June 2019 00:34
> À : [email protected]
> Objet : Re: [ceph-users] Weird behaviour of ceph-deploy
>  
> Little update :
> I check one osd I’ve installed even if the host isn’t not present in the 
> crushmap (or in cluster I guess) and I found this :
>  
> monclient: wait_auth_rotating timed out after 30
> osd.xxx 0 unable to obtain rotating service keys; retrying
>  
> I alosy add the host to the admins host :
> ceph-deploy admin sd0051
> and nothing change.
>  
> When I do the install there is not .conf pushed the new node.
>  
> Regards,
>  
> De : ceph-users <[email protected] 
> <mailto:[email protected]>> De la part de CUZA Frédéric
> Envoyé : 14 June 2019 18:28
> À : [email protected] <mailto:[email protected]>
> Objet : [ceph-users] Weird behaviour of ceph-deploy
>  
> Hi everyone,
>  
> I am facing a strange behavious from ceph-deploy.
> I try to add a new node to our cluster :
> ceph-deploy install --no-adjust-repos sd0051
>  
> Everything seems to work fine but the new bucket (host) is not created in the 
> crushmap and when I try to add a new osd to that host, the osd is created but 
> is not link to any host (normal behaviour the host is not present).
> Anyone already faces this ?
>  
> FI : We already add new node with this and this is the first time we face it.
>  
> Thanks !
>  
> _______________________________________________
> ceph-users mailing list
> [email protected]
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to