On Tue, Jun 19, 2012 at 10:29 PM, Richard Brown <[email protected]> wrote: > Good news on the IPv6 tunneling front. A 6in4 tunnel to Hurricane Electric's > Tunnelbroker.net simply works out of the box for build 3.3.8-6. > > Use the script at the bottom of the page below to establish the tunnel. Copy > the info from the Tunnelbroker web page to the script and run the script. > CeroWrt will establish the tunnel and assign IPv6 addresses to each of the > interfaces. The script and instructions are at: > > http://www.bufferbloat.net/projects/cerowrt/wiki/IPv6_Tunnel > > NB The script does not assign an IPv6 address to either of the babel > interfaces: I could not test it, so I left those lines commented out.
Babel interfaces use the same /128 for all interfaces. What I typically do with a 48 available is is 2001:XXXX:YYYY:bab1::1/128 And then give ahcp 2001:XXXX:YYYY:bab1::2/64 to distribute. And this script can be automated somewhat more, but I'm delighted to hear it works now... > > Best regards, > > Rich Brown > Hanover, NH USA > _______________________________________________ > Cerowrt-devel mailing list > [email protected] > https://lists.bufferbloat.net/listinfo/cerowrt-devel -- Dave Täht SKYPE: davetaht http://ronsravings.blogspot.com/ _______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
