I enabled crypto not via on the 2.4ghz interface on the -11 release and it worked.
I DID have to do a clean reboot tho. 5.x is showing a new problem. On Thu, Jul 12, 2012 at 4:55 PM, Dave Taht <[email protected]> wrote: > Might have been the bug felix fixed in -11 > > Might also have corrupted the /etc/config/wireless and/or > /etc/config/network file too. if you ended up with a wlan0-1 in there > that would be it... > > I too rarely use the gui interface. > > On Thu, Jul 12, 2012 at 4:45 PM, Maciej Soltysiak <[email protected]> > wrote: >> Hi, >> >> Just flashed WNDR3800 with 3.3.8-10 and I get a weird problem. >> After flashing it works fine, until I change radio0 and 1 wifi settings: set >> WPA2, set channel, etc. >> After save&apply, on a cilent PC I am able to see the networks on the list >> but it's not possible to connect. >> I believe the client associates with the AP, but it has an APIPA address. >> Happens to normal and guest interfaces too, even if I don't touch guest >> interfaces. >> >> I logged in over the wire to see if dhcpd was running and it was, but since >> I can't find logs in the usual place I will now fallback to different >> firmware. >> >> Could that be a known issue? >> >> Regards, >> Maciej >> >> On Wed, Jul 11, 2012 at 6:56 PM, Maciej Soltysiak <[email protected]> >> wrote: >>> >>> Hi Dave, >>> >>> Thanks for a good, lengthy update. I wish you pleasant time travelling. >>> >>> One question on ECN though. >>> >>> >>> On Tue, Jul 10, 2012 at 3:43 AM, Dave Taht <[email protected]> wrote: >>>> >>>> - ECN dropping - after several high level conversations with many >>>> people smarter than me, I decided that dropping ECN packets at a >>>> certain point made sense. So did everyone else. The "certain point" >>>> remains puzzling to all, and >>>> rather than continue to waste time on it in cero I decided to play >>>> with models instead, and frankly, hope that someone else comes up with >>>> some sane way to combine ECN and codel sojourn time. >>> >>> So if we're dropping ECN packets and not of trying to allow them through >>> to communicate congestion am I better of enabling ECN on clients on my >>> network or not? >>> >>> Regards, >>> Maciej >> >> > > > > -- > Dave Täht > http://www.bufferbloat.net/projects/cerowrt/wiki - "3.3.8-6 is out > with fq_codel!" -- Dave Täht http://www.bufferbloat.net/projects/cerowrt/wiki - "3.3.8-6 is out with fq_codel!" _______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
