Hi, Thanks for all the IPv6 links. I managed to make IPV6 work on my network this morning after weeks of try. First I had to add a proxy_ndp config ( ip -6 neigh add proxy .... ) for each of my host ( my ISP router need that ). It breaks all the auto-configuration of IPv6 ...
Then I found this package in openwrt : ndppd It does all the ndp proxy magic in background. So could you add it to cero next build ? I Thanks, Sébastien 2012/9/15 Richard Brown <[email protected]>: > Folks, > > Here's an update on functioning of IPv6 in CeroWrt. I had posted a note in > mid-August saying that I had troubles making IPv6 work properly in 3.3.8-17. > Specifically, I was using the script from > http://www.bufferbloat.net/projects/cerowrt/wiki/IPv6_Tunnel to configure > IPv6 to work with Hurricane Electric's free Tunnelbroker.net service, and it > not all interfaces got addresses as expected. > > After a bit of testing, I am happy to say that the script on the IPv6 Tunnel > page above seems to work properly on 3.3.8-21, the latest CeroWrt build. This > script is substantially the same as earlier versions: I didn't have to tweak > any radvd or other configs beyond what's in this script. > > Best, > > Rich Brown > Hanover, NH > > PS I also posted a note about using mDNS/Bonjour on CeroWrt. By default, this > works as desired on all the local interfaces; the note > (http://www.bufferbloat.net/projects/cerowrt/wiki/Using_Bonjour_mDNS_or_ZeroConf_with_CeroWrt) > gives instructions for passing the mDNS traffic out the WAN port, for > instances where you are using CeroWrt as a secondary router in your home. > _______________________________________________ > Cerowrt-devel mailing list > [email protected] > https://lists.bufferbloat.net/listinfo/cerowrt-devel _______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
