[Sorry - I realized an earlier request asked to see the auto-generated /var/etc/dnsmasq.conf file. It's appended ]
> I'm still confused about using CeroWrt 3.7.3-2 to give out v6 addresses to my > laptop (it's not working). Here's what I see: > > - I'm using the HE.net 6in4 tunnel to get a /48 for my home. The router > itself has a good v6 address, and can ping global v6 addresses. > > - ifconfig in the router shows that each of the five interfaces (se00, sw00, > sw10, gw00, gw10) have addresses assigned from my /48 (see the network file > below). > > - The only uncommented lines in the /etc/dnsmasq.conf file are a "enable-ra" > and a set of dhc-range lines for each of the interfaces. (see below) The > prefixes for each of the interfaces match the prefixes in the ifconfig > command. > > - I have not modified /etc/config/dhcp, as it didn't seem to make any > difference what I put there. > > Any thoughts? Thanks. > > Rich > > ===================================== > root@OpenWrt:/etc# cat /etc/config/network > > config interface 'loopback' > option ifname 'lo' > option proto 'static' > option ipaddr '127.0.0.1' > option netmask '255.0.0.0' > > config interface 'se00' > option ifname 'se00' > option proto 'static' > option ipaddr '172.30.42.1' > option netmask '255.255.255.224' > option ip6assign '64' > > config interface 'ge00' > option ifname 'ge00' > option proto 'dhcp' > > config interface 'ge01' > option ifname '@ge00' > option proto 'dhcpv6' > option broadcast '1' > option metric '2048' > option reqprefix '60' > > config interface 'sw00' > option type 'none' > option proto 'static' > option ipaddr '172.30.42.65' > option netmask '255.255.255.224' > option ip6assign '64' > > config interface 'sw10' > option type 'none' > option proto 'static' > option ipaddr '172.30.42.97' > option netmask '255.255.255.224' > option ip6assign '64' > > config switch > option name 'rtl8366s' > option reset '1' > option enable_vlan '0' > option blinkrate '2' > option max_length '3' > > config switch_vlan > option device 'rtl8366s' > option vlan '1' > option ports '0 1 2 3 5t' > > config switch_port > option device 'rtl8366s' > option port '1' > option led '6' > > config switch_port > option device 'rtl8366s' > option port '2' > option led '9' > > config switch_port > option device 'rtl8366s' > option port '5' > option led '2' > > config interface 'gw00' > option type 'none' > option proto 'static' > option ipaddr '172.30.42.129' > option netmask '255.255.255.224' > option ip6assign '64' > > config interface 'gw10' > option type 'none' > option proto 'static' > option ipaddr '172.30.42.161' > option netmask '255.255.255.224' > option ip6assign '64' > > config interface 'gw01' > option proto 'ahcp' > > config interface 'gw11' > option proto 'ahcp' > > config interface 'henet' > option proto '6in4' > option mtu '1424' > option ttl '64' > option peeraddr '209.51.161.14' > option ip6addr '2001:470:1f06:64::2/64' > option ip6prefix '2001:470:8a63::/48' > option tunneled 'xxxxxx' > option username 'tbxxxxx' > option password 'xxxxx > > ================== > root@OpenWrt:/etc# cat /etc/dnsmasq.conf > # Added 24Jan2013 -reb > enable-ra > dhcp-range=se00,2001:470:8a63:2::,ra-stateless,ra-names > dhcp-range=sw00,2001:470:8a63:3::,ra-stateless,ra-names > dhcp-range=sw10,2001:470:8a63:4::,ra-stateless,ra-names > dhcp-range=gw00,2001:470:8a63:0::,ra-stateless,ra-names > dhcp-range=gw10,2001:470:8a63:1::,ra-stateless,ra-names > ================== root@OpenWrt:/tmp/etc# cat /var/etc/dnsmasq.conf # auto-generated config file from /etc/config/dhcp conf-file=/etc/dnsmasq.conf dhcp-authoritative domain-needed localise-queries read-ethers bogus-priv expand-hosts dhcp-script=/etc/dnsmasq_net6.sh cache-size=5000 port=53 domain=home.lan server=/home.lan/ except-interface=ge00 dhcp-leasefile=/tmp/dhcp.leases resolv-file=/tmp/resolv.conf.auto stop-dns-rebind rebind-localhost-ok address=/gw.home.lan/172.30.42.1 ptr-record=1.42.30.172.in-addr.arpa,gw.home.lan address=/wpad.home.lan/172.30.42.1 ptr-record=1.42.30.172.in-addr.arpa,wpad.home.lan dhcp-range=se00,172.30.42.2,172.30.42.27,255.255.255.224,24h dhcp-option=se00,42,0.0.0.0 dhcp-option=se00,44,0.0.0.0 dhcp-option=se00,45,0.0.0.0 dhcp-option=se00,46,8 dhcp-range=sw00,172.30.42.66,172.30.42.91,255.255.255.224,24h dhcp-option=sw00,42,0.0.0.0 dhcp-option=sw00,44,0.0.0.0 dhcp-option=sw00,45,0.0.0.0 dhcp-option=sw00,46,8 dhcp-range=sw10,172.30.42.98,172.30.42.123,255.255.255.224,24h dhcp-option=sw10,42,0.0.0.0 dhcp-option=sw10,44,0.0.0.0 dhcp-option=sw10,45,0.0.0.0 dhcp-option=sw10,46,8 dhcp-range=gw00,172.30.42.130,172.30.42.155,255.255.255.224,24h dhcp-option=gw00,42,0.0.0.0 dhcp-option=gw00,44,0.0.0.0 dhcp-option=gw00,45,0.0.0.0 dhcp-option=gw00,46,8 dhcp-range=gw10,172.30.42.162,172.30.42.187,255.255.255.224,24h dhcp-option=gw10,42,0.0.0.0 dhcp-option=gw10,44,0.0.0.0 dhcp-option=gw10,45,0.0.0.0 dhcp-option=gw10,46,8 no-dhcp-interface=ge00 no-dhcp-interface=gw01 no-dhcp-interface=gw11 _______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
