On Tue, Mar 18, 2014 at 8:10 PM, David P. Reed <[email protected]> wrote: > Is there a good usb 3.0 802.11 adapter?
None that I know of (yet). However, there are plenty of pretty good half length dual band ath9k mini-pcie cards which would fit in a board like this. So that yields a box that can run SQM at a couple hundred mbit (hopefully), and drive an AP pretty hard. (I am looking for something that can fit a full length ath10k minipcie card, which is mostly why I keep looking for something that can push gigE) there are a raft of boards like this coming out this spring, quite a few rated for extended temperature ranges, using the amd g series processors and/or intel bay trail. Some of these even have an open bios, although none I've found have 16MB of flash set aside for it. (linuxgizmos.com is good reading) I started building x86_64 versions of cero a while back with no real target as yet. (virtual machine? nuc? toke's box? my old atoms?) Amusingly the squashfs version of the x86_64 code weighs in at 14MB vs the mips 8MB. > > > On Mar 18, 2014, Dave Taht <[email protected]> wrote: >> >> If this had a full length mini-pcie slot it would be a pretty good >> candidate for a higher end cero platform. >> >> http://linuxgizmos.com/pico-itx-board-runs-linux-on-amd-g-series-soc/ > > > -- Sent from my Android device with K-@ Mail. Please excuse my brevity. -- Dave Täht Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html _______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
