The wan port of cero should be plugged into the the lan port of the actiontec, not the reverse.
You probably want to configure the actiontec as a bridge in this instance if it isn't already. On Tue, Mar 18, 2014 at 9:34 PM, Ernesto Elias <[email protected]> wrote: > Hello everyone I'm having trouble with the actiontec router supplied by > Verizon fios, since I have the bundle service of TV and Internet I need the > fios router to be able to watch on demand but I ran into a problem. It's > that when I made the ont box go Ethernet to be able to use my wndr3800 > running cerowrt on it to reduce buffer bloat and so I plugged an Ethernet > cable to one of the Lan port of the wndr3800 to the WAN port of the > actiontec it would seem that the set top boxes don't get a signal and when I > click on the remote to check diagnostic it says that the external network is > down and we'll I have question is there anything I have to do special for > the actiontec to get Internet connection to the stb? > > > _______________________________________________ > Cerowrt-devel mailing list > [email protected] > https://lists.bufferbloat.net/listinfo/cerowrt-devel > -- Dave Täht Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html _______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
