On 10/06/2014 03:41 PM, Sebastian Moeller wrote:
I have spare routers that I can run OpenWRT or CeroWRt on and I'm
setup to test with netperf, netperf-wrapper on my local network (
desktop -> router -> laptop ) it's Gbit so I can easily saturate
the router.
That sounds great. I think the first test should be to run SQM under
cerowrt, so you get a feel of how things should look. I typically run
netperf-wrapper rrul tests (for ipv4 and if available for ipv6)
through cerowrt with different settings for SQM. A second step then
is to instal SQM-scripts under openwrt and check whether the same
settings produce the same results ;)
Ok. I'll get my spare WNDR3700v2 up running the latest cerowrt. Should
be in the next few days. I'm a bit strapped for time right now.
So just let me know what you are willing/ready to test and we will
take it from there okay? (I would already be a happy camper if you
could just install the current SQM-scripts on openwrt and just send
me the output of “logread” after installing and activating SQM, as
well as the output from “tc -d qdisc” before and after enabling SQM,
and finally the output of running “/etc/init.d/sqm stop ;
/etc/init.d/sqm start” on the router’s console; that hopefully works
or at least gives some indication what might be off. If you could
throw in a quick netperf-wrapper RRUL test through the router I will
be most delighted ;))
Ok. That sounds like a good starter step. First question: Where are the
current SQM scripts located and what's the process for installing them?
Are they packages or stuff that I scp over and manually install?
I'll let you know when I've taken a stab at getting that working.
> Richard A. Smith <[email protected]>
> Former One Laptop per Child
Just FYI: I'm slowly switching my list subs over from my previous
@laptop.org address to my personal address. Just switched this one over
thus the email address change.
--
Richard A. Smith
_______________________________________________
Cerowrt-devel mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/cerowrt-devel
