Thanks Issac, It seem that the only route I am getting is on the second router, a default gateway to the babel interface, but nothing routes there. On the gateway router, I see no new routes.
I get the feeling that AHCP is working, but babel is not, somehow. -Bill > On Sep 9, 2015, at 12:35 AM, Isaac Konikoff <[email protected]> wrote: > > One additional step I've had to take to get my mesh working under cerowrt is > to disable bcp38 (Network->Firewall->BCP38) on all routers which may be a > misconfiguration on my part but it works. However, anytime one of the routers > gets rebooted, I have to 'save&apply' again even though bcp38 is already > shown as disabled. Once bcp38 is disabled, each router shows the correct > routes and I have connectivity from each router. > > I don't have my specific how-to, but I generally followed the cerowrt mesh > guide: > http://www.bufferbloat.net/projects/cerowrt/wiki/Mesh > > Troubleshooting for me was a lot of pinging and checking reported routes. > > Isaac > > > On 09/08/2015 01:09 PM, William Katsak wrote: >> Hello all, >> >> I haven’t been hanging around for a while, as things have been pretty much >> “just working” with my Cero boxes. However, I am trying to do something >> “new”, and am getting stuck. >> >> I want to configure the following setup: >> - Main router, connected to DSL, acting as default gateway. >> - Secondary router, wifi only, meshing to the main router to extend >> coverage. >> >> I figured with babel built in to Cerowrt, this should be easy enough, but I >> cannot seem to get it running. >> >> Both routers have been freshly flashed with the latest image. Does anyone >> have a current howto for this, or can give me an idea of the steps required >> to make this work? I’ve already renumbered both routers to separate subnets, >> and changed the AHCP mode on the secondary to client. The babel interface >> seems to come up, and the main router reports one AHCP client. >> >> I have no idea how to go about troubleshooting and seeing where it is >> getting stuck, any help at all is appreciated. >> >> Thanks! >> -Bill Katsak >> >> >> >> _______________________________________________ >> Cerowrt-devel mailing list >> [email protected] >> https://lists.bufferbloat.net/listinfo/cerowrt-devel >> > _______________________________________________ > Cerowrt-devel mailing list > [email protected] > https://lists.bufferbloat.net/listinfo/cerowrt-devel
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
