root@1200ac:~# uname -a Linux 1200ac 3.18.23 #1 SMP Sat Nov 28 11:07:32 CET 2015 armv7l n
is my kernel. I see I can optionally build linux 4.0 for the linksys 1200ac at this point. Anyone doing that? Dave Täht Let's go make home routers and wifi faster! With better software! https://www.gofundme.com/savewifi On Sat, Nov 28, 2015 at 3:41 PM, Dave Taht <dave.t...@gmail.com> wrote: > I went for a test drive of openwrt DESIGNATED DRIVER (Bleeding Edge, > r47665) today. > > A) I bricked the archer c7 v2. No idea why. > > B) I got a sorta working linksys 1200ac build. > > The bad news: Any attempt to run 2 or more copies of netperf's > netserver on the 1200ac router with the default qdiscs (mq + > fq_codel), at line (gbit) rate, result in it locking up *for any other > traffic, including ping* until the first netperf is more or less > complete. I fear the underlying driver is frightfully overbuffered, > or has another problem. > > http://snapon.cs.kau.se/~d/archer-c7/onenetperflockout.png > > (needs BQL, too) > > The still bad news: cake works in both directions for a while longer, > then goes boom similarly. > > The somewhat good news: > > cake "shaped" to 900mbit on inbound and outbound to the router - does > not lock up the router. It merely runs out of cpu, but still does > manage quite respectable throughput in both directions while doing > so. Note, I did not say "latency". > > http://snapon.cs.kau.se/~d/archer-c7/encouraged.png > > As usual there is some flent data in that dir if you want to draw your > own plots. > > I was not in a position to actually test traffic through the router > (because I had the archer setup to do that) > > I wouldn't draw any conclusions from this. Well, a safe conclusion, > is: don't install this build. > > On Sat, Nov 28, 2015 at 11:41 AM, Dave Taht <dave.t...@gmail.com> wrote: >> Trying to do my first openwrt build in a while. >> >> make[5]: Leaving directory >> '/home/cero4/src/archer-c7/build_dir/target-mips_34kc_musl-1.1.11/dante-1.2.2' >> Makefile:349: recipe for target 'all' failed >> >> I checked: the package "dante" is not installed. Nor can I figure out >> what package is arbitrarily requiring it. >> >> I truly am in hell. > > Simple patch for this, It involves invoking a deity. > > >> Dave Täht >> Let's go make home routers and wifi faster! With better software! >> https://www.gofundme.com/savewifi _______________________________________________ Cerowrt-devel mailing list Cerowrt-devel@lists.bufferbloat.net https://lists.bufferbloat.net/listinfo/cerowrt-devel
