Before this turns into the same thread, let me just say that I know prices
for Rambus are higher again than DDR.

Kevin Graeme

> -----Original Message-----
> From: Kevin Graeme [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 11, 2002 3:49 PM
> To: CF-Community
> Subject: RE: RAM comparisons
>
>
> Ben Braver just asked the same question last week. You can try
> searching the
> archive for "PC memory question".
>
> My reply then was:
>
> The P4 is generally best matched with Rambus memory. The PC800 RDRAM gives
> 3.2GB/s memory transfer. The PC266 gives 2.1GB/s.
>
> With that said, I would still go with the DDR system. The difference in
> speed with the Rambus vs. DDR is in Rambus's favor, but the DDR is no
> slouch. The difference in price these days is negligible, so that's not
> really a factor. And the other components in the system will still
> bottleneck much of the difference. It really comes down to ethics vs.
> theoretical performance.
>
> Rambus tried to sue the pants off of other memory vendors for using their
> proprietary tech. But Rambus was later found to have "stolen" the
> ideas for
> much of the architecture from JEDEC, the orginization that
> defines industry
> standards for memory. They served on the JEDEC commitee and
> weren't exactly
> honest about what patents they had and were working on. They were
> even sued
> by their own board.
>
> So do you go with the best performance, or do you support standards at a
> very slight decrease in performance? I build my own systems and I'm
> extremely happy with my DDR based i845e system.
>
> As for 1GB vs 512MB, if you don't whimper in terror of the extra $180 then
> go ahead and spend the money. The i845e specs support up to 2GB.
>
>
> Kevin Graeme
>
> 
______________________________________________________________________
Structure your ColdFusion code with Fusebox. Get the official book at 
http://www.fusionauthority.com/bkinfo.cfm

Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists

Reply via email to