Jesse, Are you telling me I can't do a CFMX install without a DNS entry for my box? Can't it match entries in the host file? Seems like a fairly serious limitation to me.
-mk -----Original Message----- From: Jesse Noller [mailto:[EMAIL PROTECTED]] Sent: Monday, August 19, 2002 1:53 PM To: CF-Linux Subject: RE: Linux Novice Installation question Actually, you're local box has a name, JRun, when starting, does a reverse lookup to match against you local host name definition and compares it to the one in DNS, therefore, your hostname must be set to your machines actual DNS entry. Otherwise JRun will not start, and the connector will fail. Jesse Noller [EMAIL PROTECTED] Macromedia Server Development Unix/Linux "special guy" > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Monday, August 19, 2002 1:29 PM > To: CF-Linux > Subject: RE: Linux Novice Installation question > > What's the ServerName directive for Apache looking for? I would make it > whatever Apache thinks it is. > > ~Todd > > > On Mon, 19 Aug 2002, Mark A. Kruger - CFG wrote: > > > Todd, > > > > Well - as this was actually my first try - I chose to use 1.3.x, so I > > wouldn't have to worry about the patches just yet. This is currently a > > learning experience for me <g>. As far as a name, localhost.localdomain > > localhost doesn't work? Should I change it to "localhost.localdomain > > testLinux" .... what's the syntax? > > > > -mk > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > > Sent: Monday, August 19, 2002 12:08 PM > > To: CF-Linux > > Subject: RE: Linux Novice Installation question > > > > > > Yo Dennis, looks like we're twins now. ;) We're the same person! ;) > > hehehe... > > > > > > Anyway, Mark... it should work, but it should also have a "name" for the > > box. I haven't had this problem personally, so, I can't tell you what > to > > do to solve this. > > > > Out of curiosity, what version of Apache did you install? If you answer > > 2.0.39 - don't forget about the patches. > > > > ~Todd > > > > On Mon, 19 Aug 2002, Mark A. Kruger - CFG wrote: > > > > > Todd, > > > > > > Ok - but I'm using local for now. I have: > > > > > > 127.0.0.1 localhost.localdomain localhost > > > > > > > > > > > > in the host file. Is that going to work? > > > > > > -----Original Message----- > > > From: dennis baldwin [mailto:[EMAIL PROTECTED]] > > > Sent: Monday, August 19, 2002 10:42 AM > > > To: CF-Linux > > > Subject: RE: Linux Novice Installation question > > > > > > > > > I had this same problem. Make sure your hosts file (/etc/hosts) is > > > configured correctly with your hostname and IP. I believe that was > the > > fix > > > I made to get it working. > > > > > > Regards, > > > Dennis > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > > > Sent: Monday, August 19, 2002 12:46 PM > > > To: CF-Linux > > > Subject: Re: Linux Novice Installation question > > > > > > > > > Have you looked in the log files (both CFMX and Apache's) for more > > > detailed information? > > > > > > On Mon, 19 Aug 2002, Mark A. Kruger - CFG wrote: > > > > > > > > > > > Coming from the windows world here - so be gentle. I've managed to > get > > > > Apache installed, then I managed to get CFMX installed. However, > when I > > > run > > > > the start command, it gives me the following after some boiler plate: > > > > > > > > > > > > Running the Coldfusion MX connector wizard > > > > =============================== > > > > Running the connector installer (launched on the first run of CF MX > > start > > > > script) > > > > Jrun is not started, will retry connector 12 more times > > > > Jrun is not started, will retry connector 11 more times > > > > > > > > ....etc down to the last try.... then > > > > > > > > the connector wizard has not been able to contact the local JRun > server, > > > > connect or installation aborted... > > > > > > > > then.... > > > > > > > > Coldfusion MX has been started > > > > Coldfusion MX will write logs to /home/cfmx/logs/cfserver.log > > > > > > > > Does anyone have an idea on A) why Jrun isn't running and B) why the > > > > connector is failing to start it (assuming that's it job). > > > > > > > > Thanks! > > > > > > > > Mark A. Kruger, MCSE, CFG > > > > www.cfwebtools.com > > > > www.necfug.com > > > > ...no more brochures! > > > > > > > > > > > > > > > > > > > > > > > > > > ______________________________________________________________________ Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm ------------------------------------------------------------------------------ Archives: http://www.mail-archive.com/cf-linux%40houseoffusion.com/ To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_linux or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
