Dear Dan, Glad you found this version more clear. We’ve learned a lot about how to communicate the need for this and the hope is that the latest proposal is going to be much more familiar to those who already know CF. Sounds like we achieved that.
We _could_ use “part_count_per_geom" and “node_count_per_part” where we are using node_count for each right now. My feeling on this is two fold. 1) using node counts for both feels less confusing because it is only one kind of count. 2) In the common case of 1 part per geometry, the “node_count_per_part” can be dropped all together. I had written a basic implementation of our old indirect index approach and refactored it over the last few days to use this new count approach. I found that counting nodes was very straight forward. You can see my writer here <https://github.com/dblodgett-usgs/NCDFSG/blob/master/R/addGeomData.R> and my reader here <https://github.com/dblodgett-usgs/NCDFSG/blob/master/R/FromNCDFSG.R> if anyone’s curious and can tolerate R code. Best, - Dave > On Mar 14, 2017, at 5:12 AM, Hollis, Dan <[email protected]> wrote: > > Hi Dave et al, > > Thanks for all your work on drafting this proposal. I’ve found some of the > previous technical discussions re geometries a bit tricky to follow in detail > but your latest text and example are nice and clear. > > One thought – If I understand correctly, the number of parts per geometry has > to be inferred from node_count and part_node_count. For example, the first > geometry has two parts because the first element of node_count (10) equals > the sum of the first two elements of part_node_count (5 + 5). Why not simply > store the part count itself? i.e. instead of: > > node_count = 10, 5; > > you’d have: > > part_count = 2, 1; > > The sum of the elements in part_count (i.e. 3, in this example) would need to > equal the number of elements in part_node_count and part_type. > > Regards, > > Dan > > > Dan Hollis Climatologist > Met Office Hadley Centre FitzRoy Road Exeter Devon EX1 3PB United > Kingdom > Tel: +44 (0)1392 884535 Mob: +44 (0)7342058682 Fax: +44 (0)1392 885681 > E-mail: [email protected] <mailto:[email protected]> > Website: http://www.metoffice.gov.uk <http://www.metoffice.gov.uk/> > For UK climate and past weather information, visit > http://www.metoffice.gov.uk/climate <http://www.metoffice.gov.uk/climate> > > > From: CF-metadata [mailto:[email protected]] On Behalf Of > David Blodgett > Sent: 14 March 2017 01:54 > To: CF metadata > Subject: [CF-metadata] Geometries in NetCDF Update > > Dear CF, > > Based on feedback we’ve received and the phone call we held last week, Time > Whiteaker and I have worked up a mostly complete new draft of how to store > geometries in NetCDF. We’d greatly appreciate more eyes on it if you have > time or interest. > > It’s been written up in some detail here: > https://github.com/twhiteaker/netCDF-CF-simple-geometry/blob/master/README.md > <https://github.com/twhiteaker/netCDF-CF-simple-geometry/blob/master/README.md> > > Feel free to open issues in that GitHub repository to track further > conversation or follow up on list. > > Best, > > - Dave
_______________________________________________ CF-metadata mailing list [email protected] http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
