Cameron,
Thanks. We installed the system from scratch using Cold fusion 4.5 and upgraded to
4.5.1 and 4.5.1 Patch 1. In services, there is only one cfserver. None of the other cf
processes are duplicated. I also checked with Task Manager and
could not find duplicates. We are using registry. We are behind both a firewall and
proxy server. All of the users are also behind the same firewalls and proxy servers.
The problem did not appear until the number of users on the system increased. It looks
like we will have to go to setting cookie variables. We tried ODBC but the performance
was too bad.
Thanks,
Chuck
Cameron Childress wrote:
> Long shot, but I've seen it several times....
>
> Check to see if two CF Services are running in the Control Panel. Once upon
> a time a certain version of the CF installer would not disable the older
> one. If you think this is the case, disable the older one, and your
> problems will go away.
>
> A few more things to check:
>
> Are these clients behind a firewall or proxy server?
> Do they have cookies enabled?
> I would suggest NOT storing your client vars int he registry, though this is
> almost certainly not the cause of your problem. Use an ODBC datasource
> instead.
>
> -Cameron
>
> --------------------
> Cameron Childress
> ElliptIQ Inc.
> p.770.460.7277.232
> f.770.460.0963
>
> > -----Original Message-----
> > From: Bryan LaPlante [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, January 02, 2001 12:46 PM
> > To: CF-Server
> > Subject: Re: Client variables switching
> >
> >
> > Try wrapping a cflock around the creation of the client variables and make
> > them read only. See if that remedies the problem.
> >
> > Bryan LaPlante
> > ----- Original Message -----
> > From: "Chuck Holzwarth" <[EMAIL PROTECTED]>
> > To: "CF-Server" <[EMAIL PROTECTED]>
> > Sent: Tuesday, January 02, 2001 11:37 AM
> > Subject: Client variables switching
> >
> >
> > > We are having users login to our application. When they do we set client
> > > variables with their user information. We are having a problem with the
> > > user information switching as they move through the different screens of
> > > the application. We have Cold Fusion set to store client variables in
> > > the registry. I have looked through the entire application using
> > > Extended Find for "Client." The only place these are set is in the login
> > > screen. Not all users are experiencing the problem. The problem does not
> > > always occur when moving between the same screens. Anyone have any
> > > ideas?
> > >
> > > Thanks,
> > > Chuck
> > >
> > >
> > >
> >
>
~~~~~~~~~~~~~ Paid Sponsorship ~~~~~~~~~~~~~
Get Your Own Dedicated Win2K Server! Instant Activation for $99/month w/Free
Setup from SoloServer PIII600 / 128 MB RAM / 20 GB HD / 24/7/365 Tech Support
Visit SoloServer, https://secure.irides.com/clientsetup.cfm.
------------------------------------------------------------------------------
To unsubscribe, send a message to [EMAIL PROTECTED] with
'unsubscribe' in the body or visit the list page at www.houseoffusion.com
