Thanks for the comments
I may try the netswitcher software mentioned earlier. Sounds like that is
the best solution at this point.
Thanks again,
kaigler
At 05:04 PM 4/3/2001 -0400, you wrote:
>In windows 98 you have the option to disable hardware in a profile. All
>these options are avail. when you right click on my computer and go to
>system properties. You can set a profile for docked and undocked or home and
>work......ect. First you have to copy the current profile and rename it.
>After you do that next time you boot it will promt you for which profile.
> >From there you can enable and disable hardware and what starts on boot. If
>you use the nic at the home and office you might have to get a 2nd nic. But
>I believe that you can ajust TCPIP properties depending on where you are at.
>Have fun.
>
>Steve
>----- Original Message -----
>From: "Bill Kaigler" <[EMAIL PROTECTED]>
>To: "CF-Server" <[EMAIL PROTECTED]>
>Sent: Tuesday, April 03, 2001 1:39 PM
>Subject: OT: multi boot
>
>
> > I know this is off topic but maybe someone can point me in the
> > right direction.
> >
> > I have a network setup at home and a network setup at the office.
> > Both have different host computers and configurations that I
> > continuously have to change when I start my laptop at each
> > location. Is there a 2nd party software available or is there a
> > better way to change these settings without having to go manually
> > do this everytime I change networks?
> >
> >
> > thanks in advance,
> > kaigler
> >
> >
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
------------------------------------------------------------------------------
To unsubscribe, send a message to [EMAIL PROTECTED] with
'unsubscribe' in the body or visit the list page at www.houseoffusion.com
