Trust me, if the files in the cfusionmx/db directory say merant in them as mentioned in the other post then there was an error on install and the steps I mentioned need to be made. If not, the migration wizard will not even work. It's super rare, but it does happen.
> The migration wizard manages the installation of the ODBC services. There > should be no need to change files like you're suggesting. > > Before re-installing 6.1, try removing / re-installing the connectors to > IIS. You can find bat files to handle this in C:\CFusionMX\bin\connectors. > > If that fails, I would re-run the 6.1 installer and see if that clears > things up. Be sure to rename the updater backup folder from your original > CFMX installation (C:\CFusionMX\cfmx_updater\cfmx_61) so that rerunning the > installer doesn't overwrite those files. > > chris > > > > >-----Original Message----- > >From: Michael Dinowitz [mailto:[EMAIL PROTECTED] > >Sent: Tuesday, August 05, 2003 5:06 PM > >To: CF-Talk > >Subject: Re: CF 6.1 upgrade causes sitewide 500 error!! Pain! > > > >Glad the first issue could be resolved. The second one is probably what the > >other poster mentioned, which is that the migration tool has to be run. > >Load up > >this url: > >http://127.0.0.1:8500/CFIDE/administrator/index.cfm > >and let it run. If you get a 500 error on the url, then it's probable that > >the > >update didn't finish or didn't install some needed connector. In that case, > >shut > >down the IIS service, the CF service and SQL service (and any unneeded > >service > >like FTP, print spooling, etc.). Then re-run the 6.1 updater. After this > >runs > >and before doing anything else, make sure the ODBC is running (as you did > >before). If not, fix it. If so, then run the migration. It should all go > >ok. > >It's possible that the IIS running when the updater was installed prevented > >the > >connector or something. As I don't use IIS, I can only speculate. > > > >> You were correct that the ODBC Services were not started and would not > >start > >> manually. I followed your instructions exactly and after doing this the > >> services started. That was exciting. Unfortunately the 500 error > >persists. > >> Tried restarting CF and IIS services: 500 error, tried server reboot: 500 > >> error. Any other ideas? > >> > >> Thank you so much for trying to help me. > >> > >> Dustin Snell > >> Unisyn Software, LLC > >> [EMAIL PROTECTED] > >> ----- Original Message ----- > >> From: "Michael Dinowitz" <[EMAIL PROTECTED]> > >> To: "CF-Talk" <[EMAIL PROTECTED]> > >> Sent: Tuesday, August 05, 2003 4:35 PM > >> Subject: Re: CF 6.1 upgrade causes sitewide 500 error!! Pain! > >> > >> > >> > Go to the services and see if the 2 MX ODBC services are running. If > >not, > >> try to > >> > start them. If they fail, then go to the cfusion/db dir and do a search > >> for any > >> > *.ini with the words merant in them. Change all references to > >c:\program > >> > files\merant to c:\cfusionmx\db (assuming the cfusionmx is in c). Then > >> start the > >> > ODBC services. > >> > If that's not the problem, we'll go on from there. What webserver? > >> > > >> > > >> > > Okay - hearing about all the great new stability enhancements in 6.1. > >I > >> > > immediately upgraded to eliminate a problem where the cold fusion > >> service > >> > > would stop responding until reboot about once a day at random times. > >Now > >> > > immediately after upgrade, all sites on this multsite server are > >> returning > >> > > an Internal Error 500 to the browser. > >> > > > >> > > I am so sad about this and I can see no way to revert back to the > >> orginal > >> > > MX - with all its problems at least it worked for most of the day. > >> > > > >> > > Looked in the event log and I can see that a Coldfusion SQL agent is > >> GPFing > >> > > Log folows: > >> > > > >> > > "Reporting queued error: faulting application swagent.exe, version > >> 1.93.0.0, > >> > > faulting module unknown, version 0.0.0.0, fault address 0x00000000." > >> > > > >> > > however I am not sure if the 500 problem is related because it even > >> happens > >> > > when I access non-database related pages. I would try to change the > >> driver > >> > > but I cannot access the web server without getting the 500 error - > >not > >> even > >> > > the CF Administrator! No other interesting entries in the event log. > >> > > Everything worked before. > >> > > > >> > > Environment is: > >> > > Windows 2003 Server > >> > > SQL Server 2000 Latest SP > >> > > CFMX 6.1 > >> > > > >> > > Help if you can please!!! Macromedia says they won't help me unless I > >> pay > >> > > $500 > >> > > > >> > > > >> > > > >> > > >> > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribe&forumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
