>information about the machine it's installed on
It'll be installed on the server, therefore will only be able to access the
local server. You're not testing it on your local machine with CF installed
are you? cos that will be reporting about itself...
-----Original Message-----
From: Deva, Ramesh X [ECCO Select] [mailto:[EMAIL PROTECTED]
Sent: 09 March 2004 16:05
To: CF-Talk
Subject: RE: Workstation name ?
Thanks Dave and Tom.. here i found cfx_systeminfo.zip from following
link.. it works me fine..
http://www.intrafoundation.com/cfx_systeminfo.asp
<http://www.intrafoundation.com/coldfusion.html>
Thanks
ramesh
-----Original Message-----
From: Thomas Chiverton [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 09, 2004 9:22 AM
To: CF-Talk
Subject: Re: Workstation name ?
On Tuesday 09 Mar 2004 15:03 pm, Dave Watts wrote:
> That isn't exposed to your web server, typically. I suppose
you could get
> that information through an ActiveX control.
Wasn't there a post recently ?
:hunts
Look for the subject "Getting computer name via variables?" in
the archives,
which refs:
http://www.bertd.net/downloads/whatserveristhis.zip
--
Tom Chiverton
Advanced ColdFusion Programmer
Tel: +44(0)1749 834997
email: [EMAIL PROTECTED]
BlueFinger Limited
Underwood Business Park
Wookey Hole Road, WELLS. BA5 1AF
Tel: +44 (0)1749 834900
Fax: +44 (0)1749 834901
web: www.bluefinger.com
Company Reg No: 4209395 Registered Office: 2 Temple Back East,
Temple
Quay, BRISTOL. BS1 6EG.
*** This E-mail contains confidential information for the
addressee
only. If you are not the intended recipient, please notify us
immediately. You should not use, disclose, distribute or copy
this
communication if received in error. No binding contract will
result from
this e-mail until such time as a written document is signed on
behalf of
the company. BlueFinger Limited cannot accept responsibility for
the
completeness or accuracy of this message as it has been
transmitted over
public networks.***
_____
[Todays Threads] [This Message] [Subscription] [Fast Unsubscribe] [User Settings]
