I'm not sure how it was fixed, but it's working properly now. I *may* have been because I was connecting to the public interface on Exchange and didn't have my gateway's IP address allowed to relay. However, that doesn't explain why I could relay to a single recipient but not multiple recipients. I don't think I made any other Exchange changes other than a couple of reboots (SMTP service wouldn't come back after starting it). I'll do as you suggested and get more detailed logging for SMTP. Thanks for your help.
-----Original Message----- From: Jochem van Dieten [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 14, 2008 9:49 AM To: CF-Talk Subject: Re: Multiple recipients in BCC via Exchange Jason Durham wrote: > I agree with your comment about focusing on the application over the > protocol. Thanks for setting me straight. > > We are not using IMF and the message tracking center returns 'The > tracking db on xxxx is not available or the message has left the > Exchange Organization'. In the IIS Admin you can increase the logging for the SMTP service (the defaults are rather useless). Then you should be able to see if the message got relayed elsewhere or not. If it didn't see http://technet.microsoft.com/en-us/library/aa998971.aspx Jochem ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date Get the Free Trial http://ad.doubleclick.net/clk;192386516;25150098;k Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305241 Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
