I tried the master switch with a compq 6000 and two drive arrays. The
master switch can only handle so many amps and it was brought down by the
server.
Josh
-----Original Message-----
From: Kevin Schmidt [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 09, 2001 1:37 PM
To: CF-Talk
Subject: Re: OT: hardware
www.wti.com
They have one that is IP based that you telnet to. You can also conect via
modem or direct RS232 connection.
Not a bad one for about $500
----- Original Message -----
From: "Peter Theobald" <[EMAIL PROTECTED]>
To: "CF-Talk" <[EMAIL PROTECTED]>
Sent: Friday, February 09, 2001 12:07 AM
Subject: Re: OT: hardware
> APC MasterSwitch... works like a charm.
> TCP socket, Telnet, or Web (HTTP) control interface!
>
> At 08:08 AM 2/8/01 -0700, Nick Call wrote:
> >O.T. warning.....
> >
> >I am trying to find a remote power cycling switch that is IP based, not
> >telephony based. Anyone have experience or a good source for these? My
> >application does not permit me to string in a dedicated phone line for
the
> >switch, it has to be IP based communication. I have seen them before, but
I
> >am not having much luck locating vendors.
> >
> >Thanks in advance.
> >
> >end O.T.
> >
> >Nick
> >[EMAIL PROTECTED]
> >
> >
> >
> >
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
