coming in on the end of this thread here, but it is possible to run PWS on
Win ME (after spending over 8 hours researching and installing the thing!)
The best scenario for this is to have CF and PWS on win 98 and "upgrade" to
ME - which then seems to run OK - if you have to start from scratch then
there are a couple of updates to the PWS install you have to get to make it
run OK - with the correct procedure it will take you a good 1 to 2 hours to
install it properly! The best "get-around" is to install the other services
first ONLY, then re-boot and install the PWS server, ect, THEN reboot and
install CF server.
Alternately - depending on whether you want to run ASP and CFM or not - use
apache - which is v. stable on ME.
Either way, if you need further help then email me off list.
J
-----Original Message-----
From: Karl Simanonok [mailto:[EMAIL PROTECTED]]
Sent: 23 July 2001 09:15
To: CF-Talk
Subject: Re: PWS on ME
Funny, I used to think too that PWS and Windows ME were incompatible, and
it might have been from this list that I got that impression. Then I
bought a used laptop (ThinkPad 560X) with both installed and working fine
together. I added CF and it runs great too. Maybe there's some special
trick to it.
Regards,
Karl Simanonok
At 10:31 PM 7/22/2001 -0400, John Allred wrote:
>I'd be interested to know if another server could be installed, but I
>know it's not possible to install PWS on ME.
Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
