I'm having some troubles configuring clustering on CF5.
Specificaly, the load monitor on all servers runs at less than 3% for 20-30
seconds then shoots up to 100% and makes the machine in the cluster offline.
To simplify testing this, the problem duplicates by adding only a single
machine to the cluster and bringing up load monitor.
Here is my process:
1. Create the Cluster
2. Add A SINGLE machine to the cluster
3. Configure a basic probe to the btauxdir\cfprobe.cfm file checking for
"Hello"
4. Manually verify cfprobe.cfm is working
5. Bring up the load monitor on the single server.
Within 30 seconds server load is reported at 100%. Using OS tools and
checking the service, there is no noticable load.
I have found restarting the CF monitoring service will return state to
normal for another 20-30 seconds before jumping up to full utilization.
I'm using a very simple configuration, 2 identical servers set up on DNS
round robin. No hardware ballancing. My goal is primarily failover
protection for when one machine becomes unavailable.
I did find the hotfix about CPU utilization. I didn't think it would apply
to this as OS CPU utilization is unaffected by this, but the results
duplicate regardless of applying the hotfix or not.
On an unrelated note, I've descovered on every install of every machine I've
ever made of CF5 w/ custerCATS the reset feature under ClusterCATS
Administrator -> Advanced -> Reset fails with an unable to remove Btauxdir
error message.
I've looked around and found no related issues reported in support forums or
addressed in a knowledge base article (go figure) so I thought I would see
if anyone has any ideas here...
Trey Rouse
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
FAQ: http://www.thenetprofits.co.uk/coldfusion/faq
Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
