Apologies for the OT. I've searched hi and lo for this but if anyone who uses Visio for designing dBases knows how I set a default field value in Visio please email me off list.
TIA!!!! ********** Kevin Parker Web Services Manager WorkCover Corporation [EMAIL PROTECTED] www.workcover.com p: 08 82332548 f: 08 82332000 m: 0418 806 166 ********** ************************************************************************ This e-mail is intended for the use of the addressee only. It may contain information that is protected by legislated confidentiality and/or is legally privileged. If you are not the intended recipient you are prohibited from disseminating, distributing or copying this e-mail. Any opinion expressed in this e-mail may not necessarily be that of the WorkCover Corporation of South Australia. Although precautions have been taken, the sender cannot warrant that this e-mail or any files transmitted with it are free of viruses or any other defect. If you have received this e-mail in error, please notify the sender immediately by return e-mail and destroy the original e-mail and any copies. ______________________________________________________________________ Get Your Own Dedicated Windows 2000 Server PIII 800 / 256 MB RAM / 40 GB HD / 20 GB MO/XFER Instant Activation � $99/Month � Free Setup http://www.pennyhost.com/redirect.cfm?adcode=coldfusionb FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/[email protected]/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
